Valid

JB/T 12744-2016Remanufactured internal combustion engines - Starter process specifications (English PDF)

再制造内燃机起动机工艺规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12744-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 5, 2016

Implementation date

September 1, 2016

Scope

JB/T 12744-2016 is the English-translated version of 再制造内燃机起动机工艺规范.

Starters are the subject of JB/T 12744-2016, a recommended standard of the Chinese machinery industry on remanufacturing.

The document gives the terms and definitions, the basic requirements, the requirements on the remanufacturing process and the performance requirements for the remanufactured starter, followed by the factory inspection and by marking, packaging, transport and storage.

It covers the remanufacturing of starters for internal combustion engines and motor vehicles and of their main parts, and similar machinery for ships and other uses may be handled under it as well.

Among the standards it quotes are GB/T 28619, JB/T 6697-2006, JB/T 6705-2006, JB/T 6706-2006, JB/T 6707-2006 and JB/T 6708-2007. Its Chinese classification is J91 and its ICS code 27.020.

Found what you need?

Document preview — JB/T 12744-2016

National Standard of the People's Republic of China

ICS: 27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Basic requirements
4.1 Recovery requirements
4.2 Disassembly
4.3 Classification
5 Requirements on the remanufacturing process
5.1 End covers (including front end cover, middle cover and rear end cover)
5.2 One way clutch
5.3 Planetary reduction components
5.4 Armature
5.5 Stator assembly
5.6 Brush holder assembly
5.7 Solenoid switch assembly and relay assembly
5.8 Shift fork
5.9 Fasteners
5.10 Assembly
6 Performance requirements of the remanufactured starter
7 Factory inspection
8 Marking, packaging, transport and storage
8.1 Marking
8.2 Packaging
8.3 Transport
8.4 Storage

What this standard covers

This standard specifies terms and definitions, basic requirements, remanufacturing process requirements, remanufacturing starter performance requirements, factory inspection, marking, packaging, transportation and storage of engine and motor vehicle starter and its main parts remanufacturing. This standard applies to the internal combustion engine and motor vehicle starters and their parts of the remanufacturing, ships and other similar machinery can be used.

Document data

International classification (ICS): 27.020.

Chinese classification (CCS): J91.

Estimated length of the Chinese original: 9,998 words.

Standards quoted by this document

GB/T 28619; JB/T 6697-2006; JB/T 6705-2006; JB/T 6706-2006; JB/T 6707-2006; JB/T 6708-2007

3 Terms and definitions

4 Basic requirements

5 Requirements on the remanufacturing process

6 Performance requirements of the remanufactured starter

7 Factory inspection

8 Marking, packaging, transport and storage

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

JB/T 13326-2018|JB/T 13327-2018|JB/T 13339-2018|JB/T 13340-2018|JB/T 12732-2016|JB/T 12733-2016

How to Download JB/T 12744-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.