JB/T 12721-2016In-situ nanoindentation and scratch testing instruments for solid materials - Technical specification (English PDF)
固体材料原位纳米压痕/划痕测试仪 技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12721-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
June 1, 2016
Scope
JB/T 12721-2016 is the English-translated version of 固体材料原位纳米压痕/划痕测试仪 技术规范.
JB/T 12721-2016 is a recommended machinery industry standard of China covering in-situ nanoindentation and scratch testing instruments for solid materials.
The document establishes the terms, definitions and symbols for in-situ nanoindentation and scratching, the technical requirements, the test methods and the inspection rules, and the provisions for marking and packaging.
The testers it addresses use an imaging device to monitor in situ the indentation hardness, the scratch hardness and other material parameters of solid materials.
Among the standards it quotes are GB/T 2611-2007, GB/T 21838.1-2008, GB/T 21838.2-2008, GB/T 21838.3, GB/T 22458 and JB/T 6147-2007. It is filed under N71 and ICS 19.060.
Found what you need?
Document preview — JB/T 12721-2016
National Standard of the People's Republic of China
- ICS
- 19.060
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and symbols
- 3.1 Terms and definitions
- 3.2 Symbols
- 4 Technical requirements
- 4.1 Environmental and working conditions
- 4.2 General requirements
- 4.3 Indentation and scratch device
- 4.4 Indenter
- 4.5 Imaging device
- 4.6 Test cycle time
- 4.7 Overall performance
- 4.8 Safety protection devices
- 4.9 Resistance to transport jolting
- 4.10 Electrical equipment
- 4.11 Other requirements
- 5 Inspection methods
- 5.1 Inspection conditions
- 5.2 Apparatus used for the inspection
- 5.3 Check of the general requirements
- 5.4 Inspection of the indentation and scratch device
- 5.5 Inspection of the indenter
- 5.6 Inspection of the imaging device
- 5.7 Inspection of the test cycle time
- 5.8 Inspection of the overall performance
- 5.9 Inspection of the safety protection devices
- 5.10 Test of the resistance to transport jolting
- 5.11 Inspection of the electrical equipment
- 5.12 Inspection of the other requirements
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Decision rules
- 7 Marking and packaging
- 7.1 Marking
- 7.2 Packaging
What this standard covers
This standard specifies the terms and definitions of in situ nanoindentation/scratches and symbols, technical requirements, test methods, inspection rules, marking and packaging. This standard is applicable to the in-situ nanoindentation/scratch tester (hereinafter referred to as the tester) for the in situ indentation hardness, scratch hardness and material parameters of the solid material for in situ monitoring by means of an imaging device.
Document data
International classification (ICS): 19.060.
Chinese classification (CCS): N71.
Estimated length of the Chinese original: 18,156 words.
Standards quoted by this document
GB/T 2611-2007; GB/T 21838.1-2008; GB/T 21838.2-2008; GB/T 21838.3; GB/T 22458; JB/T 6147-2007
3 Terms, definitions and symbols
4 Technical requirements
5 Inspection methods
6 Inspection rules
7 Marking and packaging
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2611-2007Testing machines - General requirements
- GB/T 21838.1-2008Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
- GB/T 21838.2-2008Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
- GB/T 21838.3Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
- GB/T 22458General rules for the instrumented nanoindentation test
- JB/T 6147-2007echnical specification for the packaging, packaging marking and handling of testing machine products
Similar standards
How to Download JB/T 12721-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 21838.1-2008 — Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
GB/T 21838.2-2008 — Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
GB/T 21838.3-2008 — Metallic materials - Instrumented indentation test for hardness and materials parameter - Part 5: calibration of reference blocks
Secure payment via Stripe
Payments accepted
JB/T 12721-2016
$255.00