Valid

JB/T 12717-2016Sintered timing sprockets for automotive engines - Technical requirements (English PDF)

汽车发动机烧结正时链轮 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12717-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 15, 2016

Implementation date

June 1, 2016

Scope

JB/T 12717-2016 is the English-translated version of 汽车发动机烧结正时链轮 技术条件.

JB/T 12717-2016 is the Chinese machinery industry standard covering sintered timing sprockets for automotive engines - Technical requirements. It was issued on 15 January 2016 and has been in force since 1 June 2016, as a first edition.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2016 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 12717-2016

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Product classification
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Chemical composition, physical properties and microstructure of the sintered timing sprocket of the automobile engine
  • 4.3 Tooth form of the sintered timing sprocket of the automobile engine
  • 4.4 Dimensional tolerances and geometrical tolerances of the sintered timing sprocket of the automobile engine
  • 4.5 Service life
  • 4.6 Appearance
  • 4.7 Special requirements of the user
  • 5 Test methods
  • 6 Inspection rules
  • 7 Marking, packaging, transport and storage
  • Figure 1 Roller chain sprocket
  • Figure 2 Silent chain sprocket
  • Figure 3 Camshaft sprocket
  • Figure 4 Camshaft sprocket with VVT phaser
  • Figure 5 Crankshaft sprocket
  • Figure 6 Oil pump sprocket
  • Figure 7 Diagram of the camshaft sprocket
  • Figure 8 Diagram of the crankshaft sprocket
  • Figure 9 Diagram of the oil pump sprocket
  • Figure 10 Diagram of the test of the crushing strength of the teeth
  • Table 1 Chemical composition of the sintered timing sprocket of the automobile engine
  • Table 2 Density, hardness and microstructure of the sintered timing sprocket of the automobile engine
  • Table 3 Important dimensions of the sintered timing sprocket and accuracy grades of their tolerances and geometrical tolerances

3 Product classification

4 Technical requirements

5 Test methods

6 Inspection rules

7 Marking, packaging, transport and storage

Foreword

This document was issued on 15 January 2016 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 June 2016.

It is the first edition of this standard.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

JB/T 12717-2016 is the first edition of this standard. It was issued on 15 January 2016 and has been in force since 1 June 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12717-2016 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12717-2016 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12717-2016 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12717-2016 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is JB/T 12717-2016. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 12717-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12717-2016

$145.00