Valid

JB/T 12618-2016Touch switches for household and similar electrical appliances (English PDF)

家用和类似用途电器的触摸开关

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12618-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 15, 2016

Implementation date

June 1, 2016

Scope

JB/T 12618-2016 is the English-translated version of 家用和类似用途电器的触摸开关.

Touch switches for household and similar electrical appliances are the subject of JB/T 12618-2016, a recommended Chinese machinery industry standard. The document fixes the safety, the performance, the test methods and the inspection rules for these switches.

It applies to switches that turn the supply of household and similar appliances and other equipment on and off, worked by a person through an actuator or through an energising sensor that may be joined to the switch physically or electrically or set apart from it, with a rated voltage of no more than 480 V and a rated current of no more than 30 A. Among the standards it quotes are GB 2099.1-2008, GB/T 2828.1, GB 4706.1-2005, GB 8898-2011, GB 15092.1-2010, GB/T 21711.1-2008 and JB/T 6212.

The Chinese classification is K64 and the international classification 29.120.40.

Found what you need?

Document preview — JB/T 12618-2016

National Standard of the People's Republic of China

ICS: 29.120.40

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Rated values
5 Classification, model and marking
6 Technical requirements and test methods
7 Packaging, transport and storage
Annex A (informative) Inspection rules
Annex B (informative) Software assessment
Figure 1 Position of the switch actuator
Figure 2 Examples of screw terminals and bolt terminals
Figure 3 Diagram of the conductor damage test
Figure 4 Principle circuit diagram of the vibration test
Table 1 Preferred rated values
Table 2 Characteristic codes
Table 3 Design codes
Table 4 Function codes
Table 5 Current and cross sectional area of the conductor
Table 6 Parameter table of the screw and bolt wiring terminals
Table 7 Dimensions of the washer or pressure plate used in the screw and bolt wiring terminals
Table 8 Dimensions of the pillar type wiring terminal
Table 9 Tightening torque of the screws
Table 10 Axial tensile force borne by the conductor
Table 11 Cross section of the conductor and height value
Table 12 Insulation resistance and dielectric strength
Table A.1 Items and sequence of the type test

What this standard covers

This standard specifies the safety, performance, test methods and inspection rules for touch switches (hereinafter referred to as switches) for household and similar electrical appliances. This standard applies to persons operated by means of actuators, or by means of an energizing sensor (which may be physically or electrically connected to the switch and may also be arranged separately) for use in household or similar electrical appliances and other equipment, With the help of human motion or by the human excitation sensor to operate the switch (or by means of the switch system) to turn on and off electrical equipment power supply, rated voltage does not exceed 480V, rated current of not more than 30A switch. Operators operated by a person by means of an actuator, or by an energizing sensor (which may be physically or electrically connected to the switch, may also be arranged separately) are also applicable to this standard. Similar switches used in special environments

Document data

International classification (ICS): 29.120.40.

Chinese classification (CCS): K64.

Estimated length of the Chinese original: 22,253 words.

Standards quoted by this document

GB 2099.1-2008; GB/T 2828.1; GB 4706.1-2005; GB 8898-2011; GB 15092.1-2010; GB/T 21711.1-2008; JB/T 6212

3 Terms and definitions

4 Rated values

5 Classification, model and marking

6 Technical requirements and test methods

7 Packaging, transport and storage

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

Normative references

GB 2099.1-2008

Similar standards

JB/T 13033-2017|GB/T 16915.1-2024|GB/T 16915.2-2024|GB/T 16915.3-2019|GB/T 16915.4-2019|GB 16915.1-2014

How to Download JB/T 12618-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.