Valid

JB/T 12581-2015Biological deodorization filters (English PDF)

生物除臭滤池

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12581-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12581-2015 is the English-translated version of 生物除臭滤池.

JB/T 12581-2015 is the Chinese machinery industry standard for biological deodorization filters. It gives the terms and definitions for this equipment and covers its classification and naming, the technical requirements, the test methods, the inspection rules, and marking, packaging, transport and storage.

The standard applies to biological deodorizing filters used to treat the odorous gas produced by sewage treatment plants, sludge treatment plants, breeding farms, food processing plants and similar operations.

The Ministry of Industry and Information Technology issued it on 10 October 2015 and it came into force on 1 March 2016.

Found what you need?

Document preview — JB/T 12581-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and designation
  • 4.1 Classification
  • 4.2 Designation
  • 5 Technical requirements
  • 5.1 Requirements on the components
  • 5.2 Performance requirements
  • 5.3 Emission requirements
  • 6 Test methods
  • 6.1 Measurement of the packing stacking height
  • 6.2 Measurement of the specific surface area of the packing
  • 6.3 Measurement of the compressive strength of the packing
  • 6.4 Measurement of the spray liquid
  • 6.5 Inspection of the air duct
  • 6.6 Measurement of the air velocity
  • 6.7 Determination of the surface load
  • 6.8 Measurement of the system resistance
  • 6.9 Measurement of the total bacterial count
  • 6.10 Noise measurement
  • 6.11 Emission indexes and inspection methods
  • 7 Inspection rules
  • 7.1 Classification of inspection
  • 7.2 Factory inspection
  • 7.3 Type inspection
  • 8 Marking, packaging, transport and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transport
  • 8.4 Storage
  • Annex A (normative) Method for measuring the total bacterial count
  • A.1 Summary of the method
  • A.2 Apparatus and test materials
  • A.3 Measuring steps
  • A.4 Colony counting and method
  • Table 1 Emission indexes and inspection methods

3 Terms and definitions

4 Classification and designation

5 Technical requirements

6 Test methods

7 Inspection rules

8 Marking, packaging, transport and storage

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

About this edition

JB/T 12581-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12581-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12581-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12581-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12581-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is JB/T 12581-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 12581-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12581-2015

$259.00