Valid

JB/T 12568-2015Optimizing multi-blade rip saws (English PDF)

纵向优选多锯片圆锯机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12568-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12568-2015 is the English-translated version of 纵向优选多锯片圆锯机.

JB/T 12568-2015 is the Chinese machinery industry standard for the optimizing multi-blade rip saw. It fixes the terms and definitions, the classification and naming, the requirements, the test methods, the inspection rules, the provisions for marking, packaging, transport and storage, and the manufacturer warranty for this machine tool.

The standard applies to the longitudinal optimizing multi-blade circular sawing machine. It is classified J65 in China. The document was issued on 10 October 2015 by the Ministry of Industry and Information Technology and became effective on 1 March 2016.

Found what you need?

Document preview — JB/T 12568-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Product model and name
4.2 Basic parameters
5 Requirements
5.1 Subcontracted parts and purchased parts
5.2 Performance and structure
5.3 Electrical system
5.4 Pneumatic and lubrication systems
5.5 Accuracy
5.6 Measuring device
5.7 Safety and hygiene
5.8 Service life
5.9 Nameplate and labels
5.10 Appearance quality
5.11 Accessories and tools
6 Test methods
6.1 No-load running test
6.2 Inspection of the geometrical accuracy
6.3 Reliability and stability
6.4 Inspection of the working accuracy
6.5 Life test (sampling)
7 Inspection rules
8 Marking, packaging, transport and storage
8.1 Marking
8.2 Packaging
8.3 Transport
8.4 Storage
9 Guarantee of the manufacturer
Figure 1 Outline structural drawing of the machine tool
Table 1 Basic parameters of the machine tool
Table 2 Geometrical accuracy of the machine tool
Table 3 Working accuracy of the machine tool

3 Terms and definitions

4 Classification and designation

5 Requirements

6 Test methods

7 Inspection rules

8 Marking, packaging, transport and storage

9 Guarantee of the manufacturer

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

About this edition

JB/T 12568-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12568-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12568-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12568-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12568-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is JB/T 12568-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 12570.1-2015|JB/T 12570.2-2015|JB/T 12569.1-2015|JB/T 12569.2-2015

How to Download JB/T 12568-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.