JB/T 12537-2015Special equipment for wet flue gas desulfurization - Absorbers (English PDF)
湿法烟气脱硫装置专用设备吸收塔
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12537-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12537-2015 is the English-translated version of 湿法烟气脱硫装置专用设备吸收塔.
JB/T 12537-2015 is the Chinese machinery industry standard for the absorber used in wet flue gas desulphurization systems. It gives terms and definitions and then covers the composition of the counter-flow spray absorption tower, its requirements, inspection and acceptance, marking, packaging, transport and storage.
The document applies to the counter-current spray absorption tower of limestone-gypsum wet flue gas desulphurization units; absorbers in single-tower arrangements and in other wet desulphurization processes, including tandem absorption tower processes, may follow it as a reference.
The Ministry of Industry and Information Technology issued it on 10 October 2015 and it came into force on 1 March 2016.
Found what you need?
Document preview — JB/T 12537-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Composition
- 5 Requirements
- 5.1 Selection and configuration
- 5.2 Requirements on the materials
- 5.3 Requirements on the structural calculation
- 5.4 Requirements on the fabrication and on the pre-assembly
- 5.5 Requirements on the painting and on the thermal insulation
- 6 Inspection and acceptance
- 6.1 Inspection of the materials
- 6.2 Inspection of the foundation dimensions
- 6.3 Inspection of the installation dimensions
- 6.4 Inspection of the welding quality
- 6.5 Water filling acceptance
- 7 Marking, packaging, transport and storage
- 7.1 Marking
- 7.2 Packaging, transport and storage
- Annex A (informative) Several typical forms of absorption tower
- Figure A.1 Absorption tower with straight top outlet
- Figure A.2 Absorption tower with horizontal side outlet
- Figure A.3 Absorption tower with tray in the spray zone
- Figure A.4 Absorption tower of variable diameter
3 Terms and definitions
4 Composition
5 Requirements
6 Inspection and acceptance
7 Marking, packaging, transport and storage
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It is the first edition of this standard.
About this edition
JB/T 12537-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12537-2015 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12537-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12537-2015 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12537-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is JB/T 12537-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 12537-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12537-2015
$209.00