JB/T 12533-2015High-voltage power supplies for electrostatic-fabric hybrid precipitators (English PDF)
电袋复合除尘器用高压电源
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12533-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12533-2015 is the English-translated version of 电袋复合除尘器用高压电源.
JB/T 12533-2015 is the Chinese machinery industry standard for the high voltage power supply of an electrostatic-fabric integrated precipitator.
It covers the type and type range of the power supply, its design and selection, the requirements, the test methods, the inspection, commissioning, operation and maintenance, the inspection rules, and the marking, instruction manual, transport and storage.
The standard applies to the high voltage power supplies used with electrostatic-fabric integrated dust collectors for dust control in the electric power, building materials, metallurgical, chemical, light industry and similar industries. It was issued on 10 October 2015 and took effect on 1 March 2016.
Found what you need?
Document preview — JB/T 12533-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Model and model series
- 4 Design selection
- 5 Requirements
- 6 Test methods
- 7 Check, test, commissioning, operation and maintenance
- 8 Inspection rules
- 9 Marking and instructions for use
- 10 Packaging, transport and storage
- Table 1 Selection table of the plate current density of the electric field zone
- Table 2 Selection table of the rated voltage
- Table 3 Temperature rise of the transformer
- Table 4 Table of the inspection items of the high voltage power supply
3 Model and model series
4 Design selection
5 Requirements
6 Test methods
7 Check, test, commissioning, operation and maintenance
8 Inspection rules
9 Marking and instructions for use
10 Packaging, transport and storage
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It is the first edition of this standard.
About this edition
JB/T 12533-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12533-2015 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12533-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12533-2015 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12533-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is JB/T 12533-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 12533-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
Secure payment via Stripe
Payments accepted
JB/T 12533-2015
$199.00