Valid

JB/T 12481-2015Automatic electrical controls - Magnetic-sensitive temperature control switches (English PDF)

电自动控制器磁敏温控开关

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12481-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12481-2015 is the English-translated version of 电自动控制器磁敏温控开关.

JB/T 12481-2015 is the Chinese machinery industry standard covering automatic electrical controls - Magnetic-sensitive temperature control switches. It was issued on 10 October 2015 and has been in force since 1 March 2016, as a first edition.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 12481-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Classification, model and basic parameters
4.1 Classification
4.2 Designation of the model
4.3 Other parameters
5 Technical requirements
5.1 Normal conditions of use
5.2 Appearance, structure and dimensions
5.3 Basic performance
5.4 Electrical performance
5.5 Environmental adaptability
5.6 Durability
5.7 Heat generation
5.8 Mechanical strength
5.9 Wear resistance of the marking
6 Test methods
6.1 Test conditions
6.2 Appearance, structure and dimensions
6.3 Basic performance
6.4 Electrical performance
6.5 Environmental adaptability
6.6 Durability
6.7 Heat generation
6.8 Mechanical strength
6.9 Wear resistance of the marking
7 Inspection rules
7.1 Classification of inspection
7.2 Factory inspection
7.3 Type inspection
8 Marking, packaging, transport and storage
8.1 Marking
8.2 Packaging
8.3 Transport
8.4 Storage
Annex A (informative) Limit requirements and test methods for the toxic and harmful substances
A.1 Limit requirements for the toxic and harmful substances
A.2 Test methods for the toxic and harmful substances
Table 1 Conditions of the cold and hot shock resistance test
Table 2 Inspection items
Table 3 Items and sequence of the type inspection

3 Terms and definitions

4 Classification, model and basic parameters

5 Technical requirements

6 Test methods

7 Inspection rules

8 Marking, packaging, transport and storage

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

JB/T 12481-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12481-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12481-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12481-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12481-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is JB/T 12481-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

GB/T 14536.6-2022|JB/T 13492-2018|JB/T 12480-2015|JB/T 8592-2013|GB/T 43964-2024|NB/T 11210-2023

How to Download JB/T 12481-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.