Valid

JB/T 12472-2015CGEK and CGGK rail fastenings (English PDF)

CGEK型、CGGK型轨道固定件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12472-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12472-2015 is the English-translated version of CGEK型、CGGK型轨道固定件.

Rail fasteners of the CGEK and CGGK types are the subject of JB/T 12472-2015. The standard specifies their structure and basic parameters, their marking, the technical requirements, the acceptance rules and the test methods, together with packaging and storage.

It applies to the fixing of rails in industries such as metallurgy, mining, non-ferrous metals and port machinery, and covers fasteners for light rails 22, 24 and 30, railway rails 38, 43, 50 and 60, and crane rails QU70, QU80, QU100 and QU120.

The standard was issued on 10 October 2015 and became effective on 1 March 2016.

Found what you need?

Document preview — JB/T 12472-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Structural type and basic parameters
  • 4 Example of designation
  • 5 Technical requirements
  • 6 Acceptance rules
  • 7 Test methods
  • 8 Marking, packaging and storage
  • Figure 1 Rail fastenings of type CGEK and of type CGEKS
  • Figure 2 Rail fastening of type CGGK
  • Figure 3 Welds of the fixing base plate of the rail fastenings of type CGEK, CGEKS and CGGK
  • Table 1 Main dimensions and parameters of the rail fastening of type CGEK
  • Table 2 Main dimensions and parameters of the rail fastening of type CGEKS
  • Table 3 Main dimensions and parameters of the rail fastening of type CGGK
  • Table 4 Materials of the main parts
  • Table 5 Performance grades and standards of the bolts, nuts, washers and rubber pressure tongues

3 Structural type and basic parameters

4 Example of designation

5 Technical requirements

6 Acceptance rules

7 Test methods

8 Marking, packaging and storage

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

About this edition

JB/T 12472-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12472-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12472-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12472-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12472-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is JB/T 12472-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 12472-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12472-2015

$179.00