JB/T 12466-2015Non-destructive testing - General specification for ultrasonic probes (English PDF)
无损检测 超声探头通用规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12466-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12466-2015 is the English-translated version of 无损检测 超声探头通用规范.
JB/T 12466-2015 is the Chinese machinery industry standard covering non-destructive testing - General specification for ultrasonic probes. It was issued on 10 October 2015 and has been in force since 1 March 2016, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 12466-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Classification
- 5 Technical requirements
- 5.1 General
- 5.2 Centre frequency
- 5.3 Bandwidth at minus 6 dB
- 5.4 Pulse width at minus 20 dB
- 5.5 Relative sensitivity
- 5.6 Squint angle
- 5.7 Impedance
- 5.8 Half spread angle
- 5.9 Near field length of the flat probe
- 5.10 Focal distance, focal zone length and focal zone width of the immersion focused probe
- 5.11 Focal distance, focal zone length and focal zone width of the contact focused normal probe and of the contact focused angle probe
- 5.12 Crosstalk of the dual crystal probe
- 5.13 Incidence point of the angle probe
- 5.14 Refraction angle of the angle probe
- 6 Inspection methods
- 6.1 Inspection temperature
- 6.2 Centre frequency and bandwidth at minus 6 dB
- 6.3 Pulse width at minus 20 dB
- 6.4 Relative sensitivity
- 6.5 Squint angle
- 6.6 Impedance
- 6.7 Half spread angle
- 6.8 Near field length of the flat probe
- 6.9 Focal distance, focal zone length and focal zone width of the immersion focused probe
- 6.10 Focal distance, focal zone length and focal zone width of the contact focused normal probe
- 6.11 Focal distance, focal zone length and focal zone width of the contact focused angle probe
- 6.12 Crosstalk of the dual crystal probe
- 6.13 Incidence point of the angle probe
- 6.14 Refraction angle of the angle probe
- 7 Inspection rules
- 7.1 Classification of inspection
- 7.2 Inspection items
- 8 Designation
- 9 Marking and labels
- 10 Packaging, transport and storage
- Annex A (normative) Equipment and layout for testing the characteristics of the sound field
- A.1 Test equipment
- A.2 Test layout
- Annex B (normative) Test blocks
- B.1 DB-R test block
- B.2 HS test block
- B.3 SDH test block
- Annex C (normative) Parameter table of the probe
- Bibliography
- Figure 1 Layout drawing of the impedance test
- Figure 2 Example of the result chart of the impedance test
- Figure B.1 DB-R test block
- Figure B.2 HS test block (semicircular step test block)
- Table 1 Inspection items of the ultrasonic probe
- Table C.1 Basic contents of the parameter table of the probe and requirements
3 Terms and definitions
4 Classification
5 Technical requirements
6 Inspection methods
7 Inspection rules
8 Designation
9 Marking and labels
10 Packaging, transport and storage
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It is the first edition of this standard.
The document is under the responsibility of the Ministry of Industry and Information Technology.
About this edition
JB/T 12466-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12466-2015 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12466-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12466-2015 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12466-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is JB/T 12466-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 12466-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12466-2015
$265.00