Valid

JB/T 12460.1-2015Printing forming machines for rigid substrates - Part 1: Testing of the accuracy (English PDF)

刚性基板喷印成形机床第1部分：精度检验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12460.1-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12460.1-2015 is the English-translated version of 刚性基板喷印成形机床第1部分：精度检验.

Part 1 of JB/T 12460, dated 2015, deals with the accuracy testing of forming machines that print on rigid substrates. It covers the geometric accuracy of the machine and the tests and checks of numerically controlled axis positioning accuracy and repeatability, with the tolerances that go with them.

The part also names the upper assemblies of the machine, the naming following GB/T 19660-2005, and gives the reference material in a bibliography. It applies to rigid substrate jet printing machines.

The Ministry of Industry and Information Technology issued it on 10 October 2015 and it took effect on 1 March 2016.

Found what you need?

Document preview — JB/T 12460.1-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Designation of the main parts and of the coordinate axes of the inkjet printer
4 Requirements for use
4.1 Units of measurement
4.2 Reference to GB/T 17421.1
4.3 Order of the inspections
4.4 Carrying out the inspections
4.5 Measuring instruments
4.6 Minimum tolerance
4.7 Inspection of the positioning accuracy
5 Inspection of the geometrical accuracy
6 Inspection of the positioning accuracy
7 Machining test
Bibliography
Figure 1 Diagram of the inkjet printer
Table 1 Main parts of the inkjet printer

3 Designation of the main parts and of the coordinate axes of the inkjet printer

4 Requirements for use

5 Inspection of the geometrical accuracy

6 Inspection of the positioning accuracy

7 Machining test

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

About this edition

JB/T 12460.1-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12460.1-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12460.1-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12460.1-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12460.1-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is JB/T 12460.1-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 12460.2-2015|JB/T 3989.3-2014|GB/T 45381-2025|JB/T 12995.3-2017|JB/T 12381.3-2015|JB/T 12525-2015

How to Download JB/T 12460.1-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.