JB/T 12334-2015Turbochargers - Noise test method (English PDF)
涡轮增压器 噪声测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12334-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12334-2015 is the English-translated version of 涡轮增压器 噪声测试方法.
JB/T 12334-2015 is a recommended Chinese machinery industry standard that describes how the noise of a turbocharger is measured. The measurement is made on a test bench, with the turbocharger fitted to a reciprocating internal combustion engine, and the standard gives both an engineering method and a simplified one.
It applies to the radial and mixed flow turbochargers that fall within the scope of GB/T 23341.1, and other turbochargers for which no suitable method exists may be tested in the same way.
Among the standards it quotes are GB/T 23341.2, JB/T 12332 and ISO 15619. The document carries the Chinese classification J91 and the international classification 27.020.
Found what you need?
Document preview — JB/T 12334-2015
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12334-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that describes how the noise of a turbocharger is measured. The measurement is made on a test bench, with the turbocharger fitted to a reciprocating internal combustion engine, and the standard gives both an engineering method and a simplified one. It applies to the radial and mixed flow turbochargers that fall within the scope of GB/T 23341.1, and other turbochargers for which no suitable method exists may be tested in the same way. Among the standards it quotes are GB/T 23341.2, JB/T 12332 and ISO 15619. The document carries the Chinese classification J91 and the international classification 27.020.
JB/T 12334-2015 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2334.1-2009
GB/T 23341.2
JB/T 12332-2015 — Reciprocating internal combustion engines - Measuring method for noise of air cleaners
ISO 15619
4 Where this standard sits
It cites 4 standards, among them JB/T 12332-2015, listed in full above.
One other standard in this catalogue cites it: GB/T 23341.2-2018.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 12336-2015 — Small and medium power biomass gas engines - Technical requirements and test methods
JB/T 12335-2015 — Turbochargers - Leak tightness test method
JB/T 12331-2015 — Reciprocating internal combustion engines - Timing belt drive systems - General requirements and test methods
7 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 23341.2Turbochargers—Part 2: Test methods
- JB/T 12332-2015Reciprocating internal combustion engines - Measuring method for noise of air cleaners
GB/T 2334.1-2009 · ISO 15619
How to Download JB/T 12334-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 23341.2-2009 — Turbochargers - Part 2: Test methods
GB/T 23341.2-2018 — Turbochargers—Part 2: Test methods
JB/T 12332-2015 — Reciprocating internal combustion engines - Measuring method for noise of air cleaners
JB/T 12334-2015
$269.00