Valid

JB/T 12244-2015Cupola - Performance test methods (English PDF)

冲天炉 性能检验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12244-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2015

Implementation date

October 1, 2015

Scope

JB/T 12244-2015 is the English-translated version of 冲天炉 性能检验方法.

JB/T 12244-2015 is the Chinese machinery industry standard that sets out how the performance of a cupola is tested. It lists the test items that make up a performance check and gives the method by which each of them is carried out.

It applies to cupolas used in cast iron foundry work. The standard is a recommended one, classified J61 in the Chinese system and 25.120.30 in the international one.

Its list of quoted documents is long; among them are GB/T 2624.2, GB/T 5072, GB/T 5989, GB/T 25370 and YB/T 386, together with several JJG metrological verification regulations.

Found what you need?

Document preview — JB/T 12244-2015

National Standard of the People's Republic of China

ICS
25.120.30

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 12244-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese machinery industry standard that sets out how the performance of a cupola is tested. It lists the test items that make up a performance check and gives the method by which each of them is carried out. It applies to cupolas used in cast iron foundry work. The standard is a recommended one, classified J61 in the Chinese system and 25.120.30 in the international one. Its list of quoted documents is long; among them are GB/T 2624.2, GB/T 5072, GB/T 5989, GB/T 25370 and YB/T 386, together with several JJG metrological verification regulations.

JB/T 12244-2015 falls under ICS 25.120.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 223.69

GB/T 2006

GB/T 2624.2

GB/T 3000

GB/T 3001

GB/T 3002

GB/T 3994

GB/T 3995

GB/T 4000

GB/T 5072

GB/T 5989

GB/T 7723

GB/T 18940

GB/T 22341.2

GB 21501

GB/T 25370

GB/T 25845

GB/T 25922

GB/T 26810

JJG 014

JJG 640

JJG 694

JJG 700

YB/T 386

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 37365-2019 — Die casting unit—Performance testing method

GB/T 21269-2018 — Cold chamber die casting machines

JB/T 12243-2015 — Die-casting unit - Safety signs

JB/T 12242-2015 — Automatic pouring machine

JB/T 12241-2015 — Static pressure moulding machines

6 Classification and status

International classification (ICS): 25.120.30

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

JJG 014

How to Download JB/T 12244-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12244-2015

$249.00