JB/T 12225-2015Specification for motors for ice crushers (English PDF)
碎冰机用电动机 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12225-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12225-2015 is the English-translated version of 碎冰机用电动机 技术条件.
JB/T 12225-2015 is the specification for the motors fitted to ice crushers. It covers the motor types, the basic parameters and dimensions, the technical requirements and the test methods, and then the inspection rules and the rules for marking, packaging, storage and transport.
It is written for household ice crushers and similar appliances, and it applies to capacitor-run induction motors, direct current motors and series motors used in such machines; other derived motors may be made to it as well.
The standard is a recommended one of the Chinese machinery industry, classified K24 in China and 29.160.39 internationally. Among the documents it quotes are GB 755-2008, GB/T 4942.1-2006, GB/T 10069.1-2006 and JB/T 10490-2004.
Found what you need?
Document preview — JB/T 12225-2015
National Standard of the People's Republic of China
- ICS
- 29.160.39
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12225-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the specification for the motors fitted to ice crushers. It covers the motor types, the basic parameters and dimensions, the technical requirements and the test methods, and then the inspection rules and the rules for marking, packaging, storage and transport. It is written for household ice crushers and similar appliances, and it applies to capacitor-run induction motors, direct current motors and series motors used in such machines; other derived motors may be made to it as well. The standard is a recommended one of the Chinese machinery industry, classified K24 in China and 29.160.39 internationally. Among the documents it quotes are GB 755-2008, GB/T 4942.1-2006, GB/T 10069.1-2006 and JB/T 10490-2004.
JB/T 12225-2015 falls under ICS 29.160.39, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 1311
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 5171.1-2014 — Small power motors—Part 1: General technical requirements
GB/T 8128
GB/T 9651
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB 12350-2009 — Safety requirements of small-power motors
JB/T 10490-2004 — Mechanical vibration of small-power motors - Measurement, evaluation and limits
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 39553-2020 — General specification for DC servo motors
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
JB/T 11703-2025 — Technical specifications for brushless DC motors for air conditioner fans
JB/T 12227-2015 — External rotor permanent magnet brushless direct current motors
JB/T 12226-2015 — Brushless DC motors used for hermetic refrigeration compressors
6 Classification and status
International classification (ICS): 29.160.39
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 1311Test methods for direct current machines
- GB/T 1993-1993Cooling methods for rotating electrical machines
- GB/T 4942.1-2006Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- GB/T 5171.1-2014Small power motors—Part 1: General technical requirements
- GB/T 8128Test methods for single-phase series motors
How to Download JB/T 12225-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12350-2009 — Safety requirements of small-power motors
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
JB/T 12225-2015
$85.00