JB/T 12175-2015Vacuum impregnated epoxy glass cloth laminated sheets for electrical purposes (English PDF)
电气用真空浸胶环氧玻璃布板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12175-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12175-2015 is the English-translated version of 电气用真空浸胶环氧玻璃布板.
JB/T 12175-2015 is the Chinese machinery industry standard for vacuum impregnated epoxy glass cloth laminated sheets used for electrical purposes. It sets out the types of these sheets together with the requirements, the test methods, the inspection rules and the provisions for packaging, marking, transport and storage.
The sheets it covers are built from treated E-glass cloth stacked into laminated blanks, which are placed in a mould where an anhydride epoxy adhesive is injected and cured under vacuum.
The document carries the Chinese classification K15 and the international classification 29.035.10. Among the standards it quotes are GB/T 1033.1-2008, GB/T 1303.2-2009, GB/T 1410-2006, GB/T 7354-2003 and GB/T 22567-2008.
Found what you need?
Document preview — JB/T 12175-2015
National Standard of the People's Republic of China
- ICS
- 29.035.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12175-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for vacuum impregnated epoxy glass cloth laminated sheets used for electrical purposes. It sets out the types of these sheets together with the requirements, the test methods, the inspection rules and the provisions for packaging, marking, transport and storage. The sheets it covers are built from treated E-glass cloth stacked into laminated blanks, which are placed in a mould where an anhydride epoxy adhesive is injected and cured under vacuum. The document carries the Chinese classification K15 and the international classification 29.035.10. Among the standards it quotes are GB/T 1033.1-2008, GB/T 1303.2-2009, GB/T 1410-2006, GB/T 7354-2003 and GB/T 22567-2008.
JB/T 12175-2015 falls under ICS 29.035.10, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1303.2-2009 — Industrial rigid laminated sheets based on thermosetting for electrical purposes -- Part 2: Test methods
GB/T 1410-2006 — [Replaced by GB/T 31838.2-2019] Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1411-2002 — Dry, solid insulating materials -- Resistance test to high-voltage, low-current arc discharges
GB/T 7354-2003 — Partial discharge measurements
GB/T 10295-2008 — Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus
GB/T 22567-2008 — Electrical insulating materials -- Methods of test for the determination of the glass transition temperature
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
GB/T 10581-2006 — Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
JB/T 12174.5-2018 — Heat-shrinkable moulded shapes - Part 5: Semi-rigid highly elastic materials - Material requirements and system performance
JB/T 12174.4-2018 — Heat-shrinkable moulded shapes - Part 4: Semi-rigid highly flame-retardant polyolefin materials - Material requirements and system performance
JB/T 12174.3-2018 — Heat-shrinkable moulded shapes - Part 3: Dimensions
6 Classification and status
International classification (ICS): 29.035.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033.1-2008Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1303.2-2009Industrial rigid laminated sheets based on thermosetting for electrical purposes -- Part 2: Test methods
- GB/T 1410-2006[Replaced by GB/T 31838.2-2019] Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- GB/T 1411-2002Dry, solid insulating materials -- Resistance test to high-voltage, low-current arc discharges
- GB/T 7354-2003High-voltage test techniques -- Partial discharge measurements
- GB/T 10295-2008Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus
Similar standards
How to Download JB/T 12175-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10295-2008 — Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1303.2-2009 — Industrial rigid laminated sheets based on thermosetting for electrical purposes -- Part 2: Test methods
JB/T 12175-2015
$105.00