JB/T 11905-2014Hot Runner Systems - Terminology, Types and Dimensions (English PDF)
热流道系统 术语、型式和尺寸
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11905-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 11905-2014 is the English-translated version of 热流道系统 术语、型式和尺寸.
Hot runner systems for plastic injection moulds are the subject of JB/T 11905-2014, a recommended standard of the Chinese machinery industry. The document sets out the terminology used for these systems and then gives their structural types, their dimensions and the way they are marked.
Its stated field of application is hot runner systems fitted to plastic injection moulds. The standard is filed under Chinese classification J46 and under two ICS entries, 01.040.25 and 25.120.30.
The Ministry of Industry and Information Technology is the issuing body, and the text quotes GB/T 1184-1996, GB/T 8846-2005, GB/T 12555-2006 and GB/T 12556-2006.
Found what you need?
Document preview — JB/T 11905-2014
National Standard of the People's Republic of China
- ICS
- 01.040.25; 25.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11905-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
Hot runner systems for plastic injection moulds are the subject of JB/T 11905-2014, a recommended standard of the Chinese machinery industry. The document sets out the terminology used for these systems and then gives their structural types, their dimensions and the way they are marked. Its stated field of application is hot runner systems fitted to plastic injection moulds. The standard is filed under Chinese classification J46 and under two ICS entries, 01.040.25 and 25.120.30. The Ministry of Industry and Information Technology is the issuing body, and the text quotes GB/T 1184-1996, GB/T 8846-2005, GB/T 12555-2006 and GB/T 12556-2006.
JB/T 11905-2014 falls under ICS 01.040.25; 25.120.30, in the field of generalities, terminology and documentation.
This catalogue holds 8 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 8846-2005 — Terminology of moulds for plastics
GB/T 12555-2006 — Injection mould bases for plastics
GB/T 12556-2006 — Specification of injection mould bases for plastics
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Standards on related subjects:
GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack
GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions
JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications
JB/T 11903-2025 — Progressive dies for heat exchanging fins
JB/T 11902-2014 — Progressive Dies for Electric Connectors - Specifications
JB/T 11901-2014 — Cold Forging Dies - Specifications
6 Classification and status
International classification (ICS): 01.040.25; 25.120.30
Chinese Standard Classification (CCS): J 46
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download JB/T 11905-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 12555-2006 — Injection mould bases for plastics
GB/T 12556-2006 — Specification of injection mould bases for plastics
JB/T 11905-2014
$285.00