JB/T 11794-2014Measurement methods for gas consumption rate and heat consumption rate of gas engines (English PDF)
燃气发动机气耗率和热耗率测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11794-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11794-2014 is the English-translated version of 燃气发动机气耗率和热耗率测量方法.
JB/T 11794-2014 is a recommended Chinese machinery standard on measuring the gas consumption rate and the heat consumption rate of gas engines. It sets out terms and definitions, the measurement methods, and what the measurement and the calculation are required to satisfy.
Its field of application includes measurements made on natural gas and biogas. Among the standards it quotes are GB/T 8170, GB/T 11062, GB/T 17747.1, GB/T 17747.2, GB/T 17747.3 and GB/T 19205.
The Chinese classification is J91 and the international classification 27.020, and the Ministry of Industry and Information Technology is the issuing body.
Found what you need?
Document preview — JB/T 11794-2014
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11794-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery standard on measuring the gas consumption rate and the heat consumption rate of gas engines. It sets out terms and definitions, the measurement methods, and what the measurement and the calculation are required to satisfy. Its field of application includes measurements made on natural gas and biogas. Among the standards it quotes are GB/T 8170, GB/T 11062, GB/T 17747.1, GB/T 17747.2, GB/T 17747.3 and GB/T 19205. The Chinese classification is J91 and the international classification 27.020, and the Ministry of Industry and Information Technology is the issuing body.
JB/T 11794-2014 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 8170
GB/T 11062
GB/T 17747.1
GB/T 17747.2
GB/T 17747.3
GB/T 19205
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 11792.6-2017 — Technical specifications for medium and high power gas engines - Part 6: Heavy fuel oil/natural gas dual fuel engines
JB/T 11787-2014 — Turbochargers - Turbine wheel castings - Specifications
JB/T 11786-2014 — Turbochargers - Compressor impeller castings - Specifications
6 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8170Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 11062Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
- GB/T 17747.1Natural gas -- Calculation of compression factor -- Part 1: Introduction and guidelines
- GB/T 17747.2Natural gas -- Calculation of compression factor -- Part 2: Calculation using molar-composition analysis
- GB/T 17747.3Natural gas -- Calculation of compression factor -- Part 3: Calculation using physical properties
- GB/T 19205Natural gas standard reference conditions
Similar standards
How to Download JB/T 11794-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11062-1989 — Natural gas--Calculation of calorific value, density and relative density
GB/T 11062-1998 — Natural gas--Calculation of calorific values, density, relative density and Wobbe index from composition
GB/T 11062-2014 — Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition
JB/T 11794-2014
$135.00