Valid

JB/T 11453-2013Life test methods for twist drills (English PDF)

麻花钻寿命试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11453-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 11453-2013 is the English-translated version of 麻花钻寿命试验方法.

JB/T 11453-2013 is a recommended standard of the Chinese machinery industry that describes how the service life of twist drills is tested. It sets out the test methods and the way the test results are assessed to arrive at a life figure for the drill.

It applies to life testing of standard parallel shank and taper shank high speed steel twist drills, and it may also be used for laboratory performance testing and as a reference for comparative tests.

The standard supersedes JB/T 50189-1999. It carries the Chinese classification J41 and the international classification 25.100.30, and among the standards it quotes are GB/T 1438.1, GB/T 3077, GB/T 6135.2 and GB/T 17984.

Found what you need?

Document preview — JB/T 11453-2013

National Standard of the People's Republic of China

ICS
25.100.30
Replacing
JB/T 50189-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 11453-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry that describes how the service life of twist drills is tested. It sets out the test methods and the way the test results are assessed to arrive at a life figure for the drill. It applies to life testing of standard parallel shank and taper shank high speed steel twist drills, and it may also be used for laboratory performance testing and as a reference for comparative tests. The standard supersedes JB/T 50189-1999. It carries the Chinese classification J41 and the international classification 25.100.30, and among the standards it quotes are GB/T 1438.1, GB/T 3077, GB/T 6135.2 and GB/T 17984.

JB/T 11453-2013 falls under ICS 25.100.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1438.1

GB/T 3077

GB/T 6135.2

GB/T 17984

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 972-2008 — Thread rolling flat dies

GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines

GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines

JB/T 11445-2013 — Toolholder with Shrink Chuck

JB/T 11444-2013 — Solid Carbide End Mills - Inspection Methods

JB/T 11443-2013 — Solid Carbide Twist Drills with Parallel Shank - Inspection Methods

6 Classification and status

International classification (ICS): 25.100.30

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 11453

EditionTitleRevisionStatus
JB/T 11453-2013Life test methods for twist drillscurrent editionCurrent
JB/T 50189-1999Life test methods for twist drillsprevious editionSuperseded

This page sells the current edition, JB/T 11453-2013. Earlier editions are listed for reference only.

How to Download JB/T 11453-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11453-2013

$165.00