JB/T 11426-2013Superabrasive Products - Diamond Core Bit (English PDF)
超硬磨料制品 金刚石薄壁钻头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11426-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11426-2013 is the English-translated version of 超硬磨料制品 金刚石薄壁钻头.
JB/T 11426-2013 is the Chinese machinery industry standard covering superabrasive Products - Diamond Core Bit. It was issued on 25 April 2013 and has been in force since 1 September 2013, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 11426-2013
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Codes and dimensions
- 3.1 Codes
- 3.2 Dimensions
- 4 Product marking
- 5 Technical requirements
- 5.1 Appearance
- 5.2 Surface roughness
- 5.3 Limit deviations of the dimensions
- 5.4 Thread dimensional tolerances of the mounting hole
- 5.5 Geometrical tolerances
- 5.6 Bending strength
- 6 Test methods
- 6.1 Appearance
- 6.2 Surface roughness
- 6.3 Limit deviations of the dimensions
- 6.4 Thread dimensional tolerances of the mounting hole
- 6.5 Geometrical tolerances
- 6.6 Bending strength
- 7 Inspection rules
- 7.1 Factory inspection
- 7.2 Supervisory inspection
- 7.3 Judgement of the sampling inspection
- 8 Marking, packaging and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Storage
- Figure 1 Core bit
- Figure 2 Mounting hole
- Figure 3 Diagram of the measurement of the outside clearance
- Figure 4 Diagram of the measurement of the bending strength
- Table 1 Dimension codes
- Table 2 Codes of the intended use
- Table 3 Codes of the manufacturing process
- Table 4 Codes of the type of mounting hole
- Table 5 Dimensions
Document data
International classification (ICS): 25.100.70.
Chinese classification (CCS): J43.
3 Codes and dimensions
4 Product marking
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking, packaging and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 11426-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 11426-2013
$195.00