JB/T 11413-2013Roller Tappet Assemblies of Diesel Fuel Injection Pump - Specifications (English PDF)
柴油机喷油泵滚轮挺柱部件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11413-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11413-2013 is the English-translated version of 柴油机喷油泵滚轮挺柱部件 技术条件.
JB/T 11413-2013 is the Chinese machinery industry standard covering roller Tappet Assemblies of Diesel Fuel Injection Pump - Specifications. It was issued on 25 April 2013 and has been in force since 1 September 2013, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 11413-2013
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Construction of the tappet assembly
- 3.1 Composition of the tappet assembly
- 3.2 Basic construction of the tappet assembly
- 3.3 Types of construction of the tappet assembly
- 3.4 Construction for improving the lubrication conditions
- 4 Technical conditions
- 4.1 Choice of the materials of the tappet assembly
- 4.2 Surface roughness of the main parts of the tappet assembly
- 4.3 Main geometrical tolerances of the tappet assembly
- 4.4 Heat treatment requirements of the tappet assembly
- 4.5 Radial fit clearance of the moving parts of the tappet assembly
- 4.6 Technical requirements of the tappet assembly
- 5 Test methods
- 5.1 Measurement of the axial movement clearance
- 5.2 Measurement of the clearance between the outer circle of the roller and the bottom of the square cavity
- 5.3 Magnetic particle inspection
- 5.4 Cleanliness test of the tappet assembly
- 5.5 Check of the freedom of movement of the tappet assembly
- 5.6 Height grading of the tappet assembly
- 5.7 Reliability test of the tappet assembly
- 6 Inspection rules
- 7 Marking, packaging, transport and storage
- 7.1 Marking
- 7.2 Packaging
- 7.3 Transport
- 7.4 Storage
- Figure 1 Main basic construction of the tappet assembly
- Figure 2 Main geometrical tolerances of the tappet assembly
- Figure 3 Main geometrical tolerances of the tappet body
- Figure 4 Main geometrical tolerances of the roller and of the roller bush
- Figure 5 Main geometrical tolerances of the roller pin
- Figure 6 Main geometrical tolerances of the crowning of the roller
- Table 1 Types of construction of the tappet assembly
- Table 2 Choice of the material grade of each part of the tappet assembly
- Table 3 Surface roughness of the main parts
- Table 4 Heat treatment requirements of the main parts of the tappet assembly (recommended)
- Table 5 Radial fit clearance chosen for the moving parts of the tappet assembly
What this standard covers
This standard specifies the structure and technical requirements for the roller tappet assembly of the diesel engine injection pump, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage requirements. This standard applies to the manufacture of the roller tappet assembly of the diesel engine injection pump.
Document data
International classification (ICS): 27.020��43.060.40.
Chinese classification (CCS): J94.
3 Construction of the tappet assembly
4 Technical conditions
5 Test methods
6 Inspection rules
7 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 11413-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 11413-2013
$105.00