Valid

JB/T 11411-2013Electric fuel feed pumps for diesel engines - Specifications (English PDF)

柴油机电动式输油泵 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11411-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 11411-2013 is the English-translated version of 柴油机电动式输油泵 技术条件.

JB/T 11411-2013 is the Chinese machinery industry standard covering electric fuel feed pumps for diesel engines - Specifications. It was issued on 25 April 2013 and has been in force since 1 September 2013, as a first edition.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2013 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 11411-2013

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Product classification
  • 5 Technical requirements
  • 5.1 Appearance
  • 5.2 Initial inlet vacuum (dry)
  • 5.3 Current at the initial inlet vacuum (dry)
  • 5.4 Flow at the specified pressure
  • 5.5 Current at the specified pressure
  • 5.6 Static pressure
  • 5.7 Current at the static pressure
  • 5.8 Low voltage performance
  • 5.9 Air leakage
  • 5.10 Cleanliness
  • 5.11 Dry running
  • 5.12 Wet vacuum
  • 5.13 Insulation performance of the pump body
  • 5.14 Pressure withstand performance
  • 5.15 Cold start performance
  • 5.16 Salt mist resistance
  • 5.17 Performance of the lead connections
  • 5.18 Chemical resistance
  • 5.19 Dustproof performance
  • 5.20 Resistance to high pressure washing
  • 5.21 Resistance to electromagnetic interference
  • 5.22 Resistance to power supply interruption interference
  • 5.23 Vibration resistance
  • 5.24 Reliability
  • 6 Test methods
  • 6.1 Test conditions
  • 6.2 Inspection of the appearance
  • 6.3 Test of the initial inlet vacuum (dry)
  • 6.4 Test of the maximum current at the initial inlet vacuum (dry)
  • 6.5 Test of the flow at the specified pressure
  • 6.6 Test of the current at the specified pressure
  • 6.7 Static pressure test
  • 6.8 Test of the current at the static pressure
  • 6.9 Low voltage performance test
  • 6.10 Air leakage test
  • 6.11 Cleanliness test
  • 6.12 Dry running test
  • 6.13 Wet vacuum test
  • 6.14 Test of the insulation performance of the pump body
  • 6.15 Pressure withstand performance test
  • 6.16 Cold start test
  • 6.17 Salt mist resistance test
  • 6.18 Test of the performance of the lead connections
  • 6.19 Chemical resistance test
  • 6.20 Dustproof test
  • 6.21 High pressure washing resistance test
  • 6.22 Electromagnetic interference resistance test
  • 6.23 Power supply interruption interference resistance test
  • 6.24 Vibration resistance test
  • 6.25 Reliability test
  • 7 Inspection rules
  • 7.1 Factory inspection
  • 7.2 Type inspection
  • 8 Marking, packaging, transport and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transport
  • 8.4 Storage
  • Figure 1 Diagram of the construction of a typical fuel feed pump
  • Figure 2 Diagram of the apparatus for the basic performance test
  • Table 1 Field strength of the radiated emission
  • Table 2 Radio frequency voltage of the conducted interference on the positive line
  • Table 3 Accuracy of the measuring instruments

What this standard covers

This standard specifies the product classification and technical requirements for electric fuel transfer pumps for diesel engines, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage requirements. This document applies to the manufacture of electric fuel transfer pumps for diesel engines.

Document data

International classification (ICS): 27.020; 43.060.40.

Chinese classification (CCS): J94.

3 Terms and definitions

4 Product classification

5 Technical requirements

6 Test methods

7 Inspection rules

8 Marking, packaging, transport and storage

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 11411-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11411-2013

$135.00