JB/T 11294-2012Heavy-duty gyratory crushers (English PDF)
强力旋回破碎机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11294-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11294-2012 is the English-translated version of 强力旋回破碎机.
Heavy-duty gyratory crushers are the product covered by JB/T 11294-2012, a recommended standard of the Chinese machinery industry. The standard establishes the types and the basic parameters of the machine, then its technical requirements, the test methods by which it is checked and the inspection rules to be applied.
It goes on to marking, labelling, the instructions for use, packaging, transportation and storage. The document carries Chinese classification D94 and international classification 73.120.
Among the standards it quotes are GB/T 1176, GB/T 1184-1996, GB/T 1804-2000, GB/T 3768, GB 5226.1, GB/T 9239.1-2006, GB/T 11357 and JB/T 5000.13.
Found what you need?
Document preview — JB/T 11294-2012
National Standard of the People's Republic of China
- ICS
- 73.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11294-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Heavy-duty gyratory crushers are the product covered by JB/T 11294-2012, a recommended standard of the Chinese machinery industry. The standard establishes the types and the basic parameters of the machine, then its technical requirements, the test methods by which it is checked and the inspection rules to be applied. It goes on to marking, labelling, the instructions for use, packaging, transportation and storage. The document carries Chinese classification D94 and international classification 73.120. Among the standards it quotes are GB/T 1176, GB/T 1184-1996, GB/T 1804-2000, GB/T 3768, GB 5226.1, GB/T 9239.1-2006, GB/T 11357 and JB/T 5000.13.
JB/T 11294-2012 falls under ICS 73.120, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1176
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3766
GB/T 3768
GB 5226.1
GB/T 6388
GB/T 7223.1-2009
GB/T 7935
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 9969
GB/T 11357
GB/T 11365-1989 — Accuracy of bevel and hypoid gears
GB/T 13306
JB/T 5000.12
JB/T 5000.13
JB/T 5000.15
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 10343-2025 — Vertical compound crusher
JB/T 11295-2012 — Heavy-duty cone crushers
JB/T 11291-2012 — High pressure grinding rolls for mining
6 Classification and status
International classification (ICS): 73.120
Chinese Standard Classification (CCS): D 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1176Casting copper and copper alloys
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
GB/T 7223.1-2009
Similar standards
How to Download JB/T 11294-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 11357-1989 — Quality, Surfaceroughness and balance of transmission pulleys
JB/T 11294-2012
$135.00