Valid

JB/T 11184.2-2011Iron charge skip buckets - Part 2: Technical requirements (English PDF)

铁料翻斗 第2部分:技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11184.2-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 11184.2-2011 is the English-translated version of 铁料翻斗 第2部分:技术条件.

JB/T 11184.2-2011 is the technical requirements part, Part 2, of the recommended Chinese machinery industry standard on iron charge skip buckets. It sets the technical requirements for these tipping buckets together with the test methods, the inspection rules, the provisions for marking, packaging, transport and storage, and the guarantee period.

The equipment it addresses is the iron charge skip used in the batching and charging of cupola furnaces. Among the standards on its quoted list are GB/T 700, GB/T 985.1, GB/T 3077, GB 5226.1, GB/T 11352 and GB/T 25711-2010.

The part is classified as J61 in the Chinese system and 25.120.30 in the international one.

Found what you need?

Document preview — JB/T 11184.2-2011

National Standard of the People's Republic of China

ICS
25.120.30

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 11184.2-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.

It is one of 2 parts of the JB/T 11184 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the technical requirements part, Part 2, of the recommended Chinese machinery industry standard on iron charge skip buckets. It sets the technical requirements for these tipping buckets together with the test methods, the inspection rules, the provisions for marking, packaging, transport and storage, and the guarantee period. The equipment it addresses is the iron charge skip used in the batching and charging of cupola furnaces. Among the standards on its quoted list are GB/T 700, GB/T 985.1, GB/T 3077, GB 5226.1, GB/T 11352 and GB/T 25711-2010. The part is classified as J61 in the Chinese system and 25.120.30 in the international one.

JB/T 11184.2-2011 falls under ICS 25.120.30, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 700

GB/T 985.1

GB/T 985.2

GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 3077

GB/T 3323-2005 — Radiographic examination of fusion welded joints in metallic materials

GB 5226.1

GB/T 7932

GB/T 9439

GB/T 9969

GB/T 11345-1989 — Method for manual ultrasonic testing and classification of testing results for ferritic steel welds

GB/T 11352

GB/T 13306

GB/T 16938

GB 20905

GB/T 25711-2010 — Foundry machinery - General technical requirements

4 Where this standard sits

It cites 17 standards, among them GB/T 1184-1996, GB/T 1804-2000, GB/T 3323-2005, listed in full above.

It is one part of the JB/T 11184 series, of which this catalogue holds 2 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 11184.1-2013 — Iron charge tipping hoppers - Part 1: Types and basic parameters

Standards on related subjects:

GB/T 37365-2019 — Die casting unit—Performance testing method

GB/T 21269-2018 — Cold chamber die casting machines

JB/T 12243-2015 — Die-casting unit - Safety signs

JB/T 11182-2026 — Transitional charging skip

JB/T 11181-2026 — Top spraying dust collector of cupola - Technical specifications

7 Classification and status

International classification (ICS): 25.120.30

Chinese Standard Classification (CCS): J 61

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11184.2-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11184.2-2011

$169.00