JB/T 11165.1-2011Skip chargers - Part 1: Basic parameters (English PDF)
翻斗加料机 第1部分:基本参数
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11165.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 11165.1-2011 is the English-translated version of 翻斗加料机 第1部分:基本参数.
JB/T 11165.1-2011 is the Chinese standard "Skip chargers - Part 1: Basic parameters". Its scope clause reads: This part of JB/T 11165 specifies the parameters and the model of the skip charger for cupolas.
This part applies to the skip charger, hereinafter referred to as the charger, used to charge cupolas of 1 tonne per hour to 10 tonnes per hour.
Found what you need?
Document preview — JB/T 11165.1-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Parameters of the charger
- 4 Model of the charger
- Table 1 Basic parameters of the charger
1 Scope
This part of JB/T 11165 specifies the parameters and the model of the skip charger for cupolas.
This part applies to the skip charger, hereinafter referred to as the charger, used to charge cupolas of 1 tonne per hour to 10 tonnes per hour.
2 Normative references
The following document is indispensable for the application of this document. For a dated reference, only the edition cited applies. For an undated reference, the latest edition, including any amendments, applies.
JB/T 3000 Method of designating the models of foundry equipment
3 Parameters of the charger
3.1 The main parameter of the charger is the maximum load of the bucket.
3.2 The basic parameters of the charger are given in Table 1.
Table 1, for the five sizes of cupola served, 1, 3, 5, 7 and 10 tonnes per hour in that order. Maximum load of the bucket, in kilograms: 150, 450, 750, 1 000 and 1 500. Capacity of the bucket, in cubic metres: 0,12 (0,21), 0,35 (0,64), 0,58 (1,07), 0,77 (1,43) and 1,15 (2,14). Normal speed of the carriage: 22 metres per minute.
Note to Table 1: the value in brackets is used where the charge is of poor quality, that is a charge containing a large amount of impurities such as steelmaking slag iron or steel turnings, and thin steel scrap.
4 Model of the charger
The model of the charger shall comply with JB/T 3000.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 11165.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 11165.2-2011 — Skip chargers - Part 2: Technical requirements
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 11165.1-2011
$199.00