JB/T 11114-2010Mining equipment for quarry - Diamond wire sawing machines (English PDF)
石材矿山开采设备 金刚石串珠锯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11114-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 21, 2011
Implementation date
April 1, 2011
Scope
JB/T 11114-2010 is the English-translated version of 石材矿山开采设备 金刚石串珠锯.
JB/T 11114-2010 is the Chinese machinery industry standard covering mining equipment for quarry - Diamond wire sawing machines. It was issued on 21 January 2011 and has been in force since 1 April 2011, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2010 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 11114-2010
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Type and basic parameters
- 4.1 Product classification
- 4.2 Method of expressing the model
- 4.3 Basic parameters
- 5 Technical requirements
- 5.1 Basic requirements
- 5.2 Performance requirements
- 5.3 Requirements on the appearance quality
- 5.4 Manufacturing requirements
- 5.5 Safety protection requirements
- 5.6 Requirements of the no-load running
- 6 Test methods
- 7 Inspection rules
- 7.1 Classification of inspection
- 7.2 Factory inspection
- 7.3 Type inspection
- 8 Marking, packaging, transport and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transport and storage
- Table 1 Basic parameters
What this standard covers
This standard specifies the type, basic parameters, and technical requirements of track-mounted diamond bead saws used in stone quarrying, describes the corresponding test methods, and specifies inspection rules, marking, packaging, transportation, and storage. This document applies to the manufacture of electric motor-driven track-mounted diamond bead saws with a cantilevered main motor support structure, and also to the manufacture of electric motor-driven track-mounted diamond bead saws with a fixed or gantry-type main motor support structure. The manufacture of internal combustion engine-driven track-mounted diamond bead saws should refer to this standard.
Document data
International classification (ICS): 73.100.30.
Chinese classification (CCS): D92.
Estimated length of the Chinese original: 11,187 words.
3 Terms and definitions
4 Type and basic parameters
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 11114-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 11114-2010
$85.00