JB/T 11103-2011Tool setters (English PDF)
对刀器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11103-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 11103-2011 is the English-translated version of 对刀器.
JB/T 11103-2011 is the Chinese machinery industry standard for the tool setter. It gives the terms and definitions used for the device, its types and basic parameters, the requirements it has to meet, the test methods, and the rules for marking and packaging.
The instruments it applies to are those whose graduation value or resolution is not less than 0.01 mm and whose size is 50 mm, 100 mm, 120 mm or 150 mm. It quotes GB/T 1219-2008, GB/T 17163-2008, GB/T 18761-2007 and JB/T 10010-2009.
It was issued by the Ministry of Industry and Information Technology. Its Chinese classification is J42 and its international classification 17.040.30.
Found what you need?
Document preview — JB/T 11103-2011
National Standard of the People's Republic of China
- ICS
- 17.040.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11103-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the tool setter. It gives the terms and definitions used for the device, its types and basic parameters, the requirements it has to meet, the test methods, and the rules for marking and packaging. The instruments it applies to are those whose graduation value or resolution is not less than 0.01 mm and whose size is 50 mm, 100 mm, 120 mm or 150 mm. It quotes GB/T 1219-2008, GB/T 17163-2008, GB/T 18761-2007 and JB/T 10010-2009.Its Chinese classification is J42 and its international classification 17.040.30.
JB/T 11103-2011 falls under ICS 17.040.30, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1219-2008 — Dial gauges
GB/T 17163-2008 — Glossary of terms used in dimensional measuring instruments - General terms
GB/T 18761-2007 — Dial indicator with electronic digital display
JB/T 10010-2009
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 10932-2024 — Screw thread micrometer
GB/T 1218-2018 — Depth micrometer
GB/T 1957-2006 — Tolerances and general features for plain limit gauges
JB/T 15356-2025 — Geometric digital display devices Terminology
JB/T 11104-2011 — Electronic digital inclinometers
JB/T 11102-2011 — Vernier, dial and digital special calipers
6 Classification and status
International classification (ICS): 17.040.30
Chinese Standard Classification (CCS): J 42
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
How to Download JB/T 11103-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1219-2008 — Dial gauges
GB/T 17163-2008 — Glossary of terms used in dimensional measuring instruments - General terms
GB/T 18761-2007 — Dial indicator with electronic digital display
JB/T 11103-2011
$135.00