JB/T 11034-2010Internal combustion engines - Valve spring retainers - Technical requirements (English PDF)
内燃机 气门弹簧座 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11034-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11034-2010 is the English-translated version of 内燃机 气门弹簧座 技术条件.
JB/T 11034-2010 is a recommended Chinese machinery industry standard that sets the specification for the valve spring retainers of internal combustion engines. It gives the terms and definitions for the retainer, then the technical requirements, the test methods, the inspection rules, the signs, the packaging, the transport and the storage.
The standard applies to the valve spring retainers of reciprocating internal combustion engines with a cylinder diameter of 200 mm or less. Its Chinese classification is J93 and its international classification 27.020.
Among the standards it quotes are GB/T 1184-1996, GB/T 1800.1-2009, GB/T 6478-2001 and GB/T 9450.
Found what you need?
Document preview — JB/T 11034-2010
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11034-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that sets the specification for the valve spring retainers of internal combustion engines. It gives the terms and definitions for the retainer, then the technical requirements, the test methods, the inspection rules, the signs, the packaging, the transport and the storage. The standard applies to the valve spring retainers of reciprocating internal combustion engines with a cylinder diameter of 200 mm or less. Its Chinese classification is J93 and its international classification 27.020. Among the standards it quotes are GB/T 1184-1996, GB/T 1800.1-2009, GB/T 6478-2001 and GB/T 9450.
JB/T 11034-2010 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 228
GB/T 230.1
GB/T 1031
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.1-2009 — Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 1958
GB/T 2828.1
GB/T 3077
GB/T 6478-2001 — Steels for cold heading and cold extruding
GB/T 9450
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 1859.1-2015 — Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 1: Engineering method
GB/T 1859.2-2015 — Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 2: Survey method
JB/T 11880.1-2014 — Diesel Engines-Selective Catalytic Reduction (SCR) Systems - Part 1: General Requirements
JB/T 15003-2025 — Internal combustion engine - Combined camshaft - Technical specifications
JB/T 11880.11-2025 — Diesel engine - Selective Catalytic Reduction (SCR) system - Part 11: Urea crystallization test method
JB/T 11035-2010 — Internal combustion engines - Valve cones - Specification
6 Classification and status
International classification (ICS): 27.020
Chinese Standard Classification (CCS): J 93
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 228Metallic materials - Tensile testing at ambient temperature
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.1-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
Similar standards
How to Download JB/T 11034-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-1995 — Surface ronghness parameters and their values
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
JB/T 11034-2010
$85.00