Valid

JB/T 10987-2010Superabrasives - Determination of impact toughness of synthetic diamond (English PDF)

超硬磨料 人造金刚石冲击韧性测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10987-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 10987-2010 is the English-translated version of 超硬磨料 人造金刚石冲击韧性测定方法.

JB/T 10987-2010 is the Chinese standard "Superabrasives - Determination of impact toughness of synthetic diamond". Its scope clause reads: This standard specifies the determination devices and determination methods for toughness index of synthetic diamond.

This standard is applicable to the determination of toughness index of synthetic diamond with grain size of 16/18~325/400. Its clauses include terms and definitions; method summary.

Found what you need?

Document preview — JB/T 10987-2010

National Standard of the People's Republic of China

Replacing
JB/T 6571-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Method Summary
  • 5 Determination Devices and Synthetic Diamond Standard Specimen
  • 5.1 Toughness Index Determinator
  • 5.2 Sieve Machine and Test Sieve
  • 5.3 Balance
  • 5.4 Synthetic Diamond Standard Specimen
  • 6 Specimen Preparation
  • 7 Determination Method
  • 7.1 Preparation prior to Determination
  • 7.2 Impact Counts
  • 7.3 Impact Specimen
  • 7.4 Sieving
  • 7.5 Calculation of Toughness Index Determination Value of Specimen
  • 7.6 Correction of Toughness Index Determination Value of Specimen

1 Scope

This standard specifies the determination devices and determination methods for toughness index of synthetic diamond.

This standard is applicable to the determination of toughness index of synthetic diamond with grain size of 16/18~325/400.

2 Normative References

The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the latest editions of these documents. For undated references, the latest edition applies to this standard.

GB/T 308 Rolling Bearings - Steel Balls (GB/T 308-2002, ISO 3290:1998, NEQ)

GB/T 6406 Super Abrasive - Grain Sizes of Diamond or Cubic Boron Nitride (GB/T 6406-1996, eqv ISO 6106:1979)

3 Terms and Definitions

For the purposes of this document, the following terms and definitions apply.

3.1 impact frequency

revolution number in unit time of the driving gear of toughness index determinator, expressed in r/min

3.2 impact counts

revolution number of driving gear in the duration that the specimen is subject to impact

3.3 unbroken ratio

ratio of the mass of residue on sieve of the specimen after being subject to certain impact counts according to specified impact frequency and sieved according to the specified conditions to the initial mass of specimen, expressed as a percentage

3.4 toughness index

capability of specimen to resist the impact effect, without breaking. The index value shall be represented by the unbroken ratio multiplied by 100

4 Method Summary

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 10987

EditionTitleRevisionStatus
JB/T 10987-2010Superabrasives - Determination of impact toughness of synthetic diamondcurrent editionCurrent
JB/T 6571-1993Superabrasives - Determination of impact toughness of synthetic diamondprevious editionSuperseded

This page sells the current edition, JB/T 10987-2010. Earlier editions are listed for reference only.

How to Download JB/T 10987-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10987-2010

$169.00