JB/T 10846-2008Flameproof electrical control devices for mine winches (English PDF)
矿用隔爆型绞车电控装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10846-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 10846-2008 is the English-translated version of 矿用隔爆型绞车电控装置.
JB/T 10846-2008 is a recommended Chinese machinery industry standard for the flameproof electrical control devices used with mine winches. For these control devices it fixes the requirements, the test methods and the inspection rules, together with the provisions on signs, the instruction manual, packaging, transport and storage.
They are used with electrically driven coal mine winches, and the control they exercise covers the whole sequence of starting, speed regulation, stopping and reversing of the flameproof three-phase AC wound-rotor motor, as well as the power brake.
Among the standards it quotes are GB 3836.1-2000, GB 14048.1-2006, JB/T 4002-1992 and MT 871-2000. Its classifications are K35 and ICS 29.260.20.
Found what you need?
Document preview — JB/T 10846-2008
National Standard of the People's Republic of China
- ICS
- 29.260.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10846-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the flameproof electrical control devices used with mine winches. For these control devices it fixes the requirements, the test methods and the inspection rules, together with the provisions on signs, the instruction manual, packaging, transport and storage. They are used with electrically driven coal mine winches, and the control they exercise covers the whole sequence of starting, speed regulation, stopping and reversing of the flameproof three-phase AC wound-rotor motor, as well as the power brake. Among the standards it quotes are GB 3836.1-2000, GB 14048.1-2006, JB/T 4002-1992 and MT 871-2000. Its classifications are K35 and ICS 29.260.20.
JB/T 10846-2008 falls under ICS 29.260.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.4-1993 — Basic environmental testing procedures for electric and electronic products - Test Db: Damp heat, cyclic
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB 3836.2-2000 — Electrical apparatus for explosive gas atmospheres-Part 2: Flameproof enclosure d
GB 3836.3-2000 — Electrical apparatus for explosive gas atmospheres-Part 3: Increased safety e
GB 5590-1985 — Mining type flameproof electric magnetic starters
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14048.4-2003 — Low-voltage switchgear and controlgear - Electromechanical contactors and motor-starters
GB 14804.5-2001
JB/T 3956-1985 — Flameproof feeder switches for mines
JB/T 4002-1992 — Terminals for flameproof low voltage electric apparatuses for coal mine
JB/T 4262-1992 — Rubber sheathed cable entry devices for explosion-proof electrical apparatus
MT 111-1998 — Mining explosion-proof low voltage alternating vacuum electromagnetic starter
MT 175-1988
MT 871-2000 — Mining type flameproof switchgear with vaccum circuit breaker for low-voltage alternate circuit
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB 12476.5-2013 — Electrical apparatus for use in the presence of combustible dust - Part 5: Protection by enclosures “tD”
GB 12476.1-2013 — Electrical apparatus for use in the presence of combustible dust -- Part 1: General requirements
GB 12476.4-2010 — Electrical apparatus for use in the presence of combustible dust - Part 4: Protection by intrinsic safety iD
JB/T 11625-2013 — Electrical apparatus for use in the presence of combustible dust - Dust explosion-proof control stations protected by enclosures and surface temperature limitation
JB/T 10847-2008 — Electrical apparatus for use in the presence of combustible dust - Dust explosion-proof plug-in devices protected by enclosures and surface temperature limitation
JB/T 10836-2008 — Electrical apparatus for use in the presence of combustible dust - Dust explosion-proof lighting switches protected by enclosures and surface temperature limitation
6 Classification and status
International classification (ICS): 29.260.20
Chinese Standard Classification (CCS): K 35
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.4-1993Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB 3836.1-2000[Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
- GB 3836.2-2000[Replaced by GB/T 3836.2-2021] Explosive atmospheres - Part 2: Equipment protection by flameproof enclosures d
- GB 3836.3-2000[Replaced by GB/T 3836.3-2021] Explosive atmospheres - Part 3: Equipment protection by increased safety “e”
- GB 5590-1985Mining type flameproof electric magnetic starters
- GB 9969.1-1998General principles for preparation of instructions for use of industrial products
GB 14804.5-2001 · MT 175-1988
Similar standards
How to Download JB/T 10846-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14048.4-2003 — Low-voltage switchgear and controlgear - Electromechanical contactors and motor-starters
GB 3836.1-2000 — Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
JB/T 10846-2008
$105.00