Valid

JB/T 10837-2008Building construction machinery and equipment - Three-row roller slewing rings (English PDF)

建筑施工机械与设备 三排柱式回转支承

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10837-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 10837-2008 is the English-translated version of 建筑施工机械与设备 三排柱式回转支承.

JB/T 10837-2008 is the Chinese machinery industry standard covering building construction machinery and equipment - Three-row roller slewing rings. It was issued on 1 February 2008 and has been in force since 1 July 2008, replacing JG/T 68-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 10837-2008

National Standard of the People's Republic of China

Replacing
JG/T 68-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10837-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 16 pages in English translation.

2 Scope Preview

JB/T 10837-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 16 pages

4 Related standards

Other editions:

JB/T 10837-2023 (later edition)

Standards on related subjects:

GB/T 8419-2023 — Earth-moving machinery - Laboratory evaluation of operator seat vibration

JB/T 8816-1998 — Construction machinery - Drive axles - Technical specifications

GB/T 13752-1992 — Design rules for tower cranes

JB/T 11677-2026 — Road construction and road maintenance machinery and equipment - Road cold recycle machine

JB/T 10839-2023 — Construction machinery and equipment Single volley ball slewing bearing

JB/T 10838-2023 — Building construction machinery and equipment Single row crossed roller (cone) slewing bearing

5 Classification and status

Chinese Standard Classification (CCS): P 97

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Similar standards

Editions of JB/T 10837

EditionTitleRevisionStatus
JB/T 10837-2008Building construction machinery and equipment - Three-row roller slewing ringscurrent editionCurrent
JG/T 68-1999Building construction machinery and equipment - Three-row roller slewing ringsprevious editionSuperseded

This page sells the current edition, JB/T 10837-2008. Earlier editions are listed for reference only.

How to Download JB/T 10837-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10837-2008

$285.00