Valid

JB/T 10582-2006Tubular rivets (English PDF)

管状铆钉

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10582-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 27, 2006

Implementation date

October 11, 2006

Scope

JB/T 10582-2006 is the English-translated version of 管状铆钉.

JB/T 10582-2006 is the Chinese machinery industry standard covering tubular rivets. It was issued on 27 July 2006 and has been in force since 11 October 2006, replacing GB/T 975-1986.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2006 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 10582-2006

National Standard of the People's Republic of China

Replacing: GB/T 975-1986

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

[Preview only]
1 Scope
2 Normative references
3 Terms and definitions
3.1 Type
3.2 Basic parameters
4 Types and basic parameters
4.1 Types
4.2 Model designation
4.3 Nominal operating conditions
4.4 Safety and hygiene
4.5 Welding
4.6 Bridge (After crane operation mechanism assembled)
4.7 Assembly
4.8 Electrical control equipment
4.9 Steel pretreatment and painting
5 Technical requirements
5.1 General requirements
5.2 Safety requirements
5.3 Cold and hot working forming
5.4 Rated load test
5.5 Whole machine noise test
5.6 Static rigidity test
5.7 Dynamic load test
5.8 Crane span deviation
5.9 Diagonal difference of bridge
6 Test methods
6.1 Exit-factory inspection
6.2 Type inspection
7 Inspection rules
7.1 Marking
7.2 Packaging, transportation and storage
7.3 Transportation
7.4 Storage
8 Marking, packaging, transportation and storage
9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10582-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 27 July 2006 and has been in force since 11 October 2006.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 10582-2006 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

NB/T 10435-2020 — General requirements for locking mechanism of quick-swap battery pack of electric vehicles

GB/T 9074.32-2017 — Bolt or screw and washer assemblies with conical spring washers

GB/T 9074.8-1988 — Cross recessed small pan headscrew, single coil spring lock washer and plain washer assemblies

JB/T 14723-2024 — Compound slot small pan head screw and square washer assemblies

JB/T 14720.2-2024 — Ring groove rivet connection pair - Part 2: Flat round head type

JB/T 14721-2024 — Slotted All Metal Hexagon Lock Nuts

5 Classification and status

Chinese Standard Classification (CCS): J 13

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Editions of JB/T 10582

Edition	Title	Revision	Status
JB/T 10582-2006	Tubular rivets	current edition	Current
GB/T 975-1986	Tubular rivets	previous edition	Superseded

This page sells the current edition, JB/T 10582-2006. Earlier editions are listed for reference only.

How to Download JB/T 10582-2006

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.