JB/T 10444-2014Specification and energy efficiency grades for Y2 series and YX2 series high-voltage three-phase induction motors (frame size 355 to 560) (English PDF)
Y2系列、YX2系列高压三相异步电动机技术条件及能效分级(机座号355~560)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10444-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 10444-2014 is the English-translated version of Y2系列、YX2系列高压三相异步电动机技术条件及能效分级(机座号355~560).
JB/T 10444-2014 is the Chinese machinery industry standard covering specification and energy efficiency grades for Y2 series and YX2 series high-voltage three-phase induction motors (frame size 355 to 560).
It was issued on 6 May 2014 and has been in force since 1 October 2014, replacing JB/T 10444-2004. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2014 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10444-2014
National Standard of the People's Republic of China
- Replacing
- JB/T 10444-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10444-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 10444-2004.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 10444-2014 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 10444-2025 (later edition)
JB/T 10444-2004 (earlier edition)
Standards on related subjects:
GB/T 1032-2023 — Test methods for three-phase asynchronous motors
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 15243-2026 — Specification for YPT series of high-voltage variable-speed three-phase asynchronous motor (frame size: 710 to 1120)
JB/T 10446-2014 — Specification and the energy efficiency grades for Y series, YX series 10kV three-phase induction motors (Frame size 400 to 630)
JB/T 10445-2014 — Specification for YR series 10 kV wound rotor three-phase induction motors (frame size 400 to 630)
5 Classification and status
Chinese Standard Classification (CCS): K 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 10444
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10444-2014 | Specification and energy efficiency grades for Y2 series and YX2 series high-voltage three-phase induction motors (frame size 355 to 560) | current edition | Current |
| JB/T 10444-2004 | Specification and energy efficiency grades for Y2 series and YX2 series high-voltage three-phase induction motors (frame size 355 to 560) | previous edition | Superseded |
This page sells the current edition, JB/T 10444-2014. Earlier editions are listed for reference only.
How to Download JB/T 10444-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10444-2014
$205.00