JB/T 10391-2008Specification for Y series (IP44) three-phase induction motors (frame size 80 to 355) (English PDF)
Y系列(IP44)三相异步电动机 技术条件(机座号80~355)
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10391-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 10391-2008 is the English-translated version of Y系列(IP44)三相异步电动机 技术条件(机座号80~355).
JB/T 10391-2008 is the Chinese machinery industry standard covering specification for Y series (IP44) three-phase induction motors (frame size 80 to 355). It was issued on 4 June 2008 and has been in force since 1 November 2008, replacing JB/T 5274-1991.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 10391-2008
National Standard of the People's Republic of China
- Replacing
- JB/T 5274-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10391-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 10391-2002.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 10391-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 20 pages
4 Related standards
Other editions:
JB/T 10391-2002 (earlier edition)
Standards on related subjects:
GB/T 1032-2023 — Test methods for three-phase asynchronous motors
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 12968-2025 — Technical specification for variable frequency speed regulating three-phase asynchronous motors for shield machines
JB/T 11710-2025 — Technical Specifications for YVF Series (IP55) Variable Frequency Speed Regulating Three-Phase Asynchronous Motors (Frame Sizes 355-450)
JB/T 10444-2025 — Technical Specifications and Energy Efficiency Classification for Y2 and YX2 Series of 6kV High-voltage Three-phase Asynchronous Motors (Frame Size 355~ 630)
5 Classification and status
Chinese Standard Classification (CCS): K 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 12839-2016Integrated water chilling (heat pump) packages
- JB/T 9824-2015Impeller aerators
- JB/T 11530-2013Closed Circuit Cooling Tower for Refrigeration
- GB/T 25405-2010Small-size light piping water irrigation machines
- JB/T 6450-2010Specification for YCTD series electromagnetic speed-regulating motors (frame size 100 to 315)
- JB/T 7123-2010Specification for YCT series adjustable-speed induction motor by electromagnetic clutch (frame size 112~355)
Similar standards
Editions of JB/T 10391
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10391-2008 | Specification for Y series (IP44) three-phase induction motors (frame size 80 to 355) | current edition | Current |
| JB/T 5274-1991 | Specification for Y series (IP44) three-phase induction motors (frame size 80 to 355) | previous edition | Superseded |
This page sells the current edition, JB/T 10391-2008. Earlier editions are listed for reference only.
How to Download JB/T 10391-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10391-2008
$345.00