Valid

JB/T 10231.10-2002Tool inspection methods - Part 10: Countersinks (English PDF)

刀具产品检测方法第10部分：锪钻

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10231.10-2002 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 16, 2002

Implementation date

December 1, 2002

Scope

JB/T 10231.10-2002 is the English-translated version of 刀具产品检测方法第10部分：锪钻.

JB/T 10231.10-2002 is the Chinese machinery industry standard covering tool inspection methods, Part 10: Countersinks. It was issued on 16 July 2002 and has been in force since 1 December 2002, as a first edition.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2002 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 10231.10-2002

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

[Preview only]
1 Scope
2 Normative references
3 Terms and definitions
3.1 Type
3.2 Basic parameters
4 Types and basic parameters
4.1 Types
4.2 Model designation
4.3 Nominal operating conditions
4.4 Safety and hygiene
4.5 Welding
4.6 Bridge (After crane operation mechanism assembled)
4.7 Assembly
4.8 Electrical control equipment
4.9 Steel pretreatment and painting
5 Technical requirements
5.1 General requirements
5.2 Safety requirements
5.3 Cold and hot working forming
5.4 Rated load test
5.5 Whole machine noise test
5.6 Static rigidity test
5.7 Dynamic load test
5.8 Crane span deviation
5.9 Diagonal difference of bridge
6 Test methods
6.1 Exit-factory inspection
6.2 Type inspection
7 Inspection rules
7.1 Marking
7.2 Packaging, transportation and storage
7.3 Transportation
7.4 Storage
8 Marking, packaging, transportation and storage
9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10231.10-2002 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 July 2002 and has been in force since 1 December 2002.

It is one of 46 parts of the JB/T 10231 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 10231.10-2002 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

JB/T 10231.1-2001 — 1: General

JB/T 10231.1-2015 — Tool inspection methods. Part 1: Generality

JB/T 10231.2-2001 — 2: Twist drills

JB/T 10231.2-2015 — Tool inspaction methods. Part 2: Twist drills

JB/T 10231.3-2001 — 3: End mills

JB/T 10231.3-2015 — Tool inspaction methods. Part 3: End mills

JB/T 10231.4-2001 — 4: Taps

JB/T 10231.4-2015 — Tool inspection methods. Part 4: Taps

JB/T 10231.5-2002 — 5: Hobs

JB/T 10231.5-2016 — 5: Gear hobs

JB/T 10231.6-2002 — 6: Shaper cutters

JB/T 10231.6-2016 — 6: Gear shaper cutters

JB/T 10231.7-2002 — 7: Round broaches

JB/T 10231.7-2016 — 7: Circular broaches

JB/T 10231.8-2002 — 8: Threading dies

JB/T 10231.8-2016 — 8: Threading dies

JB/T 10231.9-2002 — 9: Reamers

JB/T 10231.9-2016 — 9: Reamers

JB/T 10231.11-2002 — 11: Core drills

JB/T 10231.11-2017 — 11: Core drills

JB/T 10231.12-2002 — 12: Side and face milling cutters

JB/T 10231.12-2017 — 12: Side and face milling cutters

JB/T 10231.13-2002 — 13: Metal slitting saws

JB/T 10231.13-2017 — 13: Metal slitting saws

JB/T 10231.14-2002 — 14: Slotting drills

JB/T 10231.14-2017 — 14: Slotting drills

JB/T 10231.15-2002 — 15: Side and face milling cutters with indexable inserts

JB/T 10231.15-2020 — 15: Side and face milling cutters with indexable inserts

JB/T 10231.16-2002 — 16: Face milling cutters with indexable inserts

JB/T 10231.16-2020 — 16: Face milling cutters with indexable inserts

JB/T 10231.17-2002 — 17: End mills with indexable inserts

JB/T 10231.17-2020 — 17: End milling cutters with indexable inserts

JB/T 10231.18-2002 — 18: Turning tools with indexable inserts

JB/T 10231.18-2020 — 18: Turning tools with indexable inserts

JB/T 10231.19-2002 — 19: Keyway broaches

JB/T 10231.19-2020 — 19: Keyway broaches

JB/T 10231.20-2002 — 20: Straight spline broaches

JB/T 10231.20-2020 — 20: Straight spline broaches

JB/T 10231.21-2006 — 21: Rotary and rotary impact masonry drill bits with hardmetal tips

JB/T 10231.22-2006 — 22: Thread rolling flat dies

JB/T 10231.23-2006 — 23: Thread rolling cylindrical dies

JB/T 10231.24-2006 — 24: Machine hacksaw blades

JB/T 10231.25-2006 — 25: Metal cutting band saw blades

JB/T 10231.26-2006 — 26: High speed steel tool bits

JB/T 10231.27-2006 — 27: Centre drills

Other editions:

JB/T 10231.10-2017 (later edition)

Standards on related subjects:

GB/T 972-2008 — Thread rolling flat dies

GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines

GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines

5 Classification and status

Chinese Standard Classification (CCS): J 41

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 10231.15-2020|JB/T 10231.16-2020|JB/T 10231.17-2020|JB/T 10231.18-2020|JB/T 10231.19-2020|JB/T 10231.20-2020

How to Download JB/T 10231.10-2002

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.