Valid

JB/T 10188-2010Rolling bearings - Thrust bearings for automobile steering knuckles (English PDF)

滚动轴承 汽车转向节用推力轴承

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10188-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 10188-2010 is the English-translated version of 滚动轴承 汽车转向节用推力轴承.

JB/T 10188-2010 is the Chinese standard "Rolling bearings - Thrust bearings for automobile steering knuckles". Its scope clause reads: This standard specifies the symbol, structural type and designation, boundary dimensions and technical specification of thrust bearings for automobile king pin (hereinafter referred to as "bearings").

This standard is applicable to the thrust bearings for automobile and other motor vehicles and used for the production and inspection by the manufacturer as well as customer acceptance.

Found what you need?

Document preview — JB/T 10188-2010

National Standard of the People's Republic of China

Replacing
JB/T 10188-2000

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Symbols
  • 4 Structural Types and Designations
  • 4.1 Structural Type
  • 4.2 Sealing Structure
  • 4.3 Designation
  • 4.4 Designation Example
  • 5 Dimensions
  • 6 Technical Requirements
  • 6.1 Materials and Heat Treatment
  • 6.2 Tolerance of Bearing
  • 6.3 Lubricating Grease
  • 6.4 Residual Magnetism
  • 6.5 Miscellaneous
  • 7 Measurement Methods
  • 8 Inspection Rules
  • 9 Marking, Rust Prevention and Packaging

1 Scope

This standard specifies the symbol, structural type and designation, boundary dimensions and technical specification of thrust bearings for automobile king pin (hereinafter referred to as "bearings").

This standard is applicable to the thrust bearings for automobile and other motor vehicles and used for the production and inspection by the manufacturer as well as customer acceptance.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.

GB/T 272-1993 Rolling Bearing-Identification Code

GB/T 307.2-2005 Rolling Bearings-Measuring and Gauging Principles and Methods (ISO 1132-2: 2001, Rolling Bearings-Tolerances-Part 2: Measuring and Gauging Principles and Methods, MOD)

GB/T 708-2006 Dimension Shape Weight and Tolerance for Cold-rolled Steel Plates and Sheets (ISO 16162: 2000, NEQ)

GB/T 8597-2003 Rolling Bearings-Rust Proof Packaging

GB/T 13237-1991 Cold-rolled Quality Carbon Structural Steel Sheets and Strips

GB/T 18254-2002 High-carbon Chromium Bearing Steel

JB/T 1255 -2001 Specification for Heat-treatment of Rolling Bearing Parts Made from High Carbon Chromium Steel

JB/T3574-1997 Rolling Bearings-Marking for Products

JB/T 6639-2004 Specifications for Skeleton Rubber Seal of Deep Groove Ball Bearings

JB/T 6641-2007 Rolling Bearings-Residual Magnetism and Its Assessment Method

JB/T 8921-1999 Rolling Bearings and Commercial Parts-Inspection Rules […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of JB/T 10188

EditionTitleRevisionStatus
JB/T 10188-2010Rolling bearings - Thrust bearings for automobile steering knucklescurrent editionCurrent
JB/T 10188-2000Rolling bearings - Thrust bearings for automobile steering knucklesprevious editionSuperseded

This page sells the current edition, JB/T 10188-2010. Earlier editions are listed for reference only.

How to Download JB/T 10188-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10188-2010

$189.00