JB/T 10035-1999Dial thickness gauges (English PDF)
厚度表
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10035-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 20, 1999
Implementation date
January 1, 2000
Scope
JB/T 10035-1999 is the English-translated version of 厚度表.
JB/T 10035-1999 is the Chinese standard "Dial thickness gauges". Its scope clause reads: This standard specifies the requirements for dial thickness gauges. Type I has a bow frame carrying a dial indicator with pointer, dial, bezel, measuring spindle, measuring head and anvil; Type II has in addition a lifting lever.
The measuring depth L is measured from the measuring faces to the throat of the bow.
Found what you need?
Document preview — JB/T 10035-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 3.3 Recommended measuring face diameter and measuring depth
- 4 Technical requirements
3.3 Recommended measuring face diameter and measuring depth
The recommended measuring face diameter and measuring depth of the thickness gauge are given in Table 2, in millimetres.
Graduation value 0,1: measuring face diameter 10 mm or 20 mm; measuring depth L 16, 32, 125, 250, 500 or 630 mm.
Graduation value 0,01: measuring face diameter 4 mm, 6,3 mm, 8 mm, 10 mm or 20 mm; measuring depth L 16, 32, 125 or 250 mm.
Graduation value 0,001: measuring face diameter 4 mm, 6,3 mm, 8 mm or 10 mm; measuring depth L 16 mm or 32 mm.
4 Technical requirements
4.1 The thickness gauge shall be free from external defects that affect its performance in service.
4.2 Under normal conditions of use the measuring spindle shall move smoothly and freely, without sticking.
4.3 There shall be no appreciable misalignment between the two measuring faces of the thickness gauge.
4.4 The travel of the measuring spindle of a Type II thickness gauge shall go beyond the end of the working travel; the amount of overtravel is given in Table 3.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 10035-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 10035-1999
$85.00