HY/T 191-2015Determination of Iron for cooling seawater (English PDF)
海水冷却水中铁的测定
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for HY/T 191-2015 in 30 minutes.
Issued by
State Oceanic Administration
Level / Type
National · Recommended
Issue date
July 30, 2015
Implementation date
October 1, 2015
Scope
HY/T 191-2015 is the English-translated version of 海水冷却水中铁的测定.
HY/T 191-2015 — This standard specifies seawater cooling water inductively coupled plasma emission spectrometry (ICP-AES), flame atomic absorption spectrophotometry and Phenanthroline spectrophotometric method for the determination of three kinds of iron.
This standard applies to the determination of total iron and soluble iron content in seawater cooling water.
Inductively coupled plasma emission spectroscopy (ICP-AES) is the arbitration method, the lower limit of detection is 0.02mg/L; the lower limit of detection of flame atomic absorption spectrophotometry is 0.20mg/L; adjacent the detection limit of phenanthroline spectrophotometry is 2µg.
Found what you need?
Document preview — HY/T 191-2015
National Standard of the People's Republic of China
- ICS
- 07.060; 13.060
- Classification
- Z 17
Issued by: State Oceanic Administration
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 4 General
- 5 Technical requirements
- 6 Test method
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
1 Foreword
HY/T 191-2015 was issued by State Oceanic Administration on 30 July 2015 and has been in force since 1 October 2015.
The HY/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 7 pages in English translation.
2 Scope Preview
This standard specifies seawater cooling water inductively coupled plasma emission spectrometry (ICP-AES), flame atomic absorption spectrophotometry and Phenanthroline spectrophotometric method for the determination of three kinds of iron. This standard applies to the determination of total iron and soluble iron content in seawater cooling water. Inductively coupled plasma emission spectroscopy (ICP-AES) is the arbitration method, the lower limit of detection is 0.02mg/L; the lower limit of detection of flame atomic absorption spectrophotometry is 0.20mg/L; adjacent the detection limit of phenanthroline spectrophotometry is 2µg.
HY/T 191-2015 falls under ICS 07.060; 13.060, in the field of natural and applied sciences.
This catalogue holds 287 other HY/T standards in that field.
In this catalogue, HY/T standards carry edition years from 1991 to 2025.
3 Normative references
GB/T 6682
GB/T 12806-2011 — Laboratory glassware -- One-mark volumetric flasks
GB/T 12807-1991 — Laboratory glassware. Graduated pipettes
GB/T 12808-1991 — Laboratory glassware. One-mark pipettes
4 About this standard
Issued by: State Oceanic Administration
English translation: about 7 pages
Chinese original: about 10,164 characters
5 Related standards
Standards on related subjects:
GB/T 33584.3-2017 — Seawater quality requirements and analysis methods for seawater cooling system—Part 3: Determination of chloride
GB/T 33584.2-2017 — Seawater quality requirements and analysis methods for seawater cooling system—Part 2: Determination of zinc
GB 18420.1-2009 — Biological toxicity for pollutants from marine petroleum exploration and exploitation - Part 1: Grading
HY/T 0278-2019 — Methods for in-situ measurement of acoustic properties in marine sediments
HY/T 197-2015 — Determination of total alkalinity in seawater on potentiometric titration using an open-cell titration
HY/T 196-2015 — Determination of dissolved inorganic carbon in sea water using non-dispersive infrared absorption
6 Classification and status
International classification (ICS): 07.060; 13.060
Chinese Standard Classification (CCS): Z 17
Prefix HY/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
How to Download HY/T 191-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12806-2011 — Laboratory glassware -- One-mark volumetric flasks
GB/T 12807-1991 — Laboratory glassware. Graduated pipettes
GB/T 12808-1991 — Laboratory glassware. One-mark pipettes
HY/T 191-2015
$145.00