Valid

HJ 569-2010Technical requirement for environmental labeling products - Cases and bags (English PDF)

环境标志产品技术要求箱包

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for HJ 569-2010 in 30 minutes.

Issued by

Ministry of Environmental Protection Ministry of Environmental Protection of P.R.C ANNOUNCEMENT

Level / Type

National · Mandatory

Issue date

May 4, 2010

Implementation date

July 1, 2010

Scope

HJ 569-2010 is the English-translated version of 环境标志产品技术要求箱包.

HJ 569-2010 — This Standard specifies the terms and definitions, basic requirements, technical contents, and inspection methods of environmental labeling products - cases and bags.

This Standard applies to cases and bags that are made of textile fabric, leather and PU synthetic leather.

Found what you need?

Document preview — HJ 569-2010

National Standard of the People's Republic of China

Issued by: Ministry of Environmental Protection Ministry of Environmental Protection of P.R.C ANNOUNCEMENT

Foreword...4
1 Scope...5
2 Normative references...5
3 Terms and definitions...5
4 Basic requirements...6
5 Technical contents...6
6 Inspection methods...7
Appendix A...9

Foreword

This Standard is formulated for implementing the "People's Republic of China

Environmental Protection Law", reducing the impact of cases and bags in the

production and use on the environment and human health.

This Standard puts forward the requirements for cases and bags (harmful

substance limits in fabrics, metal parts in contact with human skin, smell grade),

production process, prohibited substances in package, storage and

transportation of cases and bags.

This Standard applies to Chinese environmental labeling product certification.

This Standard was organized and developed by Department of Science and

Technology Standard of the Ministry of Environmental Protection.

Main drafting organizations of this Standard. Environmental Development

Center of the Ministry of Environmental Protection, China Leather and Footwear

Industry Research Institute, Shenzhen Academy of Metrology and Quality

Inspection, Newcomer Group Co Ltd., DAPAI (China) Co., Ltd., Guangzhou

Shiling Leather Industry Research Center Co., Ltd., Guangzhou V-goal Hand

Bag Co., Ltd., Guangzhou Huadu Dr. En Leather Design Institute, Guangzhou

Huishun Exhibition Handbags Co., Ltd., Guangzhou Aowangda Leather

Product Co., Ltd., and Guangzhou Daxiwang Zipper Industries Limited.

This Standard was approved by the Ministry of Environmental Protection on

May 4, 2010.

This Standard shall be implemented since July 1, 2010. This Standard shall be

interpreted by the Ministry of Environmental Protection.

Technical requirement for

environmental labeling products - Cases and bags

1 Scope

This Standard specifies the terms and definitions, basic requirements, technical

contents, and inspection methods of environmental labeling products - cases

and bags. This Standard applies to cases and bags that are made of textile

fabric, leather and PU synthetic leather.

2 Normative references

The following standards contain the provisions which, through reference in this

Standard, constitute the provisions of this Standard. For undated references,

the effective version applies to this Standard.

GB 6675-2003 National safety technical code for toys

GB 21550-2008 The restriction of hazardous materials in polyvinyl chloride

artificial leather

GB/T 22866-2008 Leather hardware accessory - Determination of release of

nickel

GB/T 22931-2008 Leather and fur - Chemical tests - Determination of

plasticizers

HJ 507-2009 Technical requirement for environmental labeling products

Leather and synthetic leather

HJ/T 220 Technical requirement for environmental labeling products -

Adhesives

HJ/T 307 Technical Requirement for Environmental Labeling Products -

Ecotypic Textile

3 Terms and definitions

The following terms and definitions apply to this Standard.

6.5 Inspection of 5.1.2 of technical contents shall be conducted in the method

stipulated in GB/T 22866-2008.

6.6 Inspection of 5.1.3 of technical contents shall be conducted in the method

stipulated in Appendix of HJ 507-2009. Sample preparation shall be conducted

in the following steps. After the sample is unsealed, immediately extract (150±5)

cm3 of fabric sample, of which the size shall be converted according to sample

thickness. For example, for the sample of which the thickness is 1.0 mm, its

size shall be about 39 cm × 39 cm.

Coated fabric shall be tested as a whole.

6.7 Inspection of adhesive in 5.2.2 of technical contents shall be conducted in

the method stipulated in HJ/T 220.

6.8 Inspection of transportable heavy metal limits in ink in 5.2.3 of technical

contents shall be conducted in the method stipulated in Appendix C of GB 6675-

2003.

6.9 Other indicators of technical contents shall be verified by document review

and inspection on the spot.

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

Normative references

GB 6675-2003

How to Download HJ 569-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.