HJ 1252-2022Self-monitoring technology guidelines for pollution sources - Livestock and poultry breeding (English PDF)

5.1 Wastewater discharge monitoring

Wastewater discharge monitoring points, monitoring indicators and minimum monitoring frequency are implemented in accordance with Table 1.

5.2 Monitoring of fugitive exhaust emissions

The monitoring points, monitoring indicators and minimum monitoring frequency of fugitive exhaust emissions shall be implemented in accordance with Table 2.

5.3 Monitoring of ambient noise at the site

5.3.1 The setting of monitoring points for environmental noise at the farm boundary should follow the principles in HJ 819, mainly considering breeding pens, crushing equipment, fans, exposure the distribution of noise sources such as gas equipment, dehydration equipment, and pumps in the site area and the location of surrounding noise-sensitive buildings.

5.3.2 Daytime and nighttime noise monitoring shall be carried out at least once every quarter for ambient noise at the site boundary.

When affected by the frequent and occasional noises, measure the maximum sound level of the frequent and occasional noises at the same time. Night noise monitoring may not be carried out for those who do not produce at night. noise around for sound-sensitive buildings, the frequency of monitoring should be increased.

5.4 Surrounding environmental quality impact monitoring

5.4.1 If there are clear provisions in laws and regulations, the surrounding environmental quality impact monitoring shall be carried out as required.

5.4.2 If there is no specific requirement, if the pollutant discharging unit deems it necessary, it may refer to HJ 2.3, HJ 91.2, HJ 610, HJ according to the actual situation 164.The relevant regulations in HJ 442.8 carry out monitoring of surrounding surface water, groundwater and seawater. Monitoring indicators and minimum monitoring frequency are in accordance with the table

3 Execute.

5.5 Other requirements

5.5.1 In addition to the pollutant indicators in Tables 1 and 2, the pollutant indicators in 5.5.1.1 and 5.5.1.2 should also be included in the scope of monitoring indicators, and refer to Table 1~Table 2 and HJ 819 to determine the monitoring frequency.

5.5.1.1 Pollutant Discharge Permit, Implemented Pollutant Discharge (Control) Standards, Environmental Impact Assessment Documents and Their Approvals [Only in 2015 Pollutant discharge units that have obtained the approval of environmental impact assessment after January 1, 2009], and the pollutants specified in the relevant ecological environment management regulations.

mark.

5.5.1.2 The sewage discharge unit determines the actual discharge according to the raw and auxiliary materials used in the production process, the production process, the types of intermediate and final products, and the monitoring results.

released, the pollutant indicators in the list of toxic and hazardous pollutants or the priority control chemicals list, or other toxic pollutant indicators.

5.5.2 The monitoring frequency of each indicator can be increased according to the determination principle in HJ 819 on the basis of meeting this standard.

5.5.3 Key pollutant discharging units shall install and use automatic monitoring equipment according to laws and regulations. Non-key pollutant discharging units do not have mandatory requirements.

The monitoring frequency of bits and indicators shall be determined with reference to this standard.

5.5.4 Sampling methods, monitoring analysis methods, monitoring quality assurance and quality control shall be implemented in accordance with HJ 819.

5.5.5 The description and changes of the monitoring program shall be implemented in accordance with HJ 819.

6.1 Information records

6.1.1 Monitoring information record

Manual monitoring records and automatic monitoring operation and maintenance records are implemented in accordance with HJ 819.The authenticity and accuracy of the automatic monitoring data by the sewage unit Responsible for the abnormal data transmission should be reported in a timely manner, and implemented in accordance with national standards or automatic monitoring data abnormality marking rules.

6.1.2 Information record of the operation status of production and pollution control facilities

6.1.2.1 General provisions

The pollutant discharging unit shall record in detail the operation status of its production and pollution control facilities, and shall refer to 6.1.2.2~6.1.2.3 and HJ 1029 in daily production Record relevant information and organize it into a ledger for future reference.

6.1.2.2 Production Health Record

Record production and operation information such as breeding species, number of stalls, stall area, inventory, and output by batches; record total water intake, Total displacement, aggregated by year.

6.1.2.3 Operation records of pollution control facilities

The operation of wastewater pollution control facilities should record the name and process of the treatment facility, design parameters, operating parameters, and the addition of main chemicals.

Pollutant discharge, sludge production and treatment and disposal, etc., record the operation, failure and maintenance of sewage treatment facilities;

The operation of dye treatment facilities should record the name and process of treatment facilities, design parameters, operating parameters, fugitive emission control measures, etc.

Operation failure and maintenance of waste gas treatment facilities; noise pollution control facilities should record daily inspections, failures, and maintenance or replacement.

6.1.3 Solid waste information record

Record the method of cleaning solid waste, the amount of waste produced and removed, the process of waste treatment, and the destination of waste use, etc. on a daily basis.

6.2 Information reporting, emergency reporting and information disclosure

Execute in accordance with HJ 819.