HG/T 4849-2016Powdered nitrile butadiene rubber (English PDF)
粉末丁腈橡胶
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4849-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 5, 2016
Implementation date
July 1, 2016
Scope
HG/T 4849-2016 is the English-translated version of 粉末丁腈橡胶.
HG/T 4849-2016 is the recommended chemical industry standard of China covering powdered nitrile butadiene rubber, abbreviated P-NBR.
It establishes the grades of the material and, for each of them, the requirements, the test methods, the inspection rules and the provisions on packaging, marking, storage and transport, together with the quality assurance period.
It applies to the fine powder produced from butadiene and acrylonitrile as the main monomers by emulsion polymerisation followed by coagulation and drying. The standard is classified G35 nationally and 83.060 internationally, with the rubbers.
It quotes GB/T 1232.1-2000, GB/T 4498.1-2013, GB/T 5576, GB/T 5577, GB/T 6543-2008, GB/T 15340-2008, GB/T 19187, GB/T 24131-2009 and SH/T 1157.2-2015.
Found what you need?
Document preview — HG/T 4849-2016
National Standard of the People's Republic of China
- ICS
- 83.060
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4849-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 January 2016 and has been in force since 1 July 2016.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard of China covering powdered nitrile butadiene rubber, abbreviated P-NBR. It establishes the grades of the material and, for each of them, the requirements, the test methods, the inspection rules and the provisions on packaging, marking, storage and transport, together with the quality assurance period. It applies to the fine powder produced from butadiene and acrylonitrile as the main monomers by emulsion polymerisation followed by coagulation and drying. The standard is classified G35 nationally and 83.060 internationally, with the rubbers. It quotes GB/T 1232.1-2000, GB/T 4498.1-2013, GB/T 5576, GB/T 5577, GB/T 6543-2008, GB/T 15340-2008, GB/T 19187, GB/T 24131-2009 and SH/T 1157.2-2015.
HG/T 4849-2016 falls under ICS 83.060, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1232.1-2000 — Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of mooney viscosity
GB/T 4498.1-2013 — Rubber - Determination of ash - Part 1: Muffle furnace method
GB/T 5576
GB/T 5577
GB/T 6543-2008 — Single and double corrugated boxes for transport packages
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 15340-2008 — Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
GB/T 19187
GB/T 24131-2009 — Determination of volatile raw rubber content
SH/T 1157.2-2015 — Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile. butadiene rubber(NBR). Part 2: Kjeldahl method
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 8655-2019 — Styrene-butadiene rubber (SBR)1500, 1502
GB/T 36089-2018 — Acrylonitrile-butadiene rubber(NBR)
GB/T 14647-2008 — Chloroprene rubber CR121, CR122
HG/T 5113-2016 — Thermoplastic elastomers - Styrenic compounds for wires and cables
HG/T 4903-2016 — Dynamically vulcanized thermoplastic elastomers (TPV) - Ethylene-propylene-diene rubber/polypropylene type
HG/T 3316-2014 — Chloroprene rubber CR 244
6 Classification and status
International classification (ICS): 83.060
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1232.1-2000Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity
- GB/T 4498.1-2013Rubber - Determination of ash - Part 1: Muffle furnace method
- GB/T 5576Rubber and latices - Nomenclature
- GB/T 5577Specification for the codification of synthetic rubber
- GB/T 6543-2008Single and double corrugated boxes for transport packages
- GB/T 8170-2008Rules of rounding off for numerical values & expression and judgement of limiting values
Similar standards
How to Download HG/T 4849-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1232.1-2000 — Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of mooney viscosity
GB/T 15340-2008 — Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
GB/T 19187-2003 — Sampling procedures for inspection of raw synthetic rubber
HG/T 4849-2016
$105.00