HG/T 4803-2015Methallyl alcohol polyether (English PDF)
甲基烯丙醇聚醚
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4803-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
HG/T 4803-2015 is the English-translated version of 甲基烯丙醇聚醚.
HG/T 4803-2015 is the Chinese chemical industry standard for methallyl alcohol polyether. It describes the structure and the naming of the polyether and then its requirements, sampling, test methods, inspection rules, marking, packaging, transport and storage.
The product covered is polymerized from methallyl alcohol and ethylene oxide as the main raw materials and serves as a feedstock for polycarboxylate superplasticizers, silicone emulsions and similar products.
Classified G73 with ICS 71.100.40, it draws its methods from GB/T 6368-2008, GB/T 6678-2003, GB/T 6682-2008, GB/T 7383-2007, GB/T 8170-2008, GB/T 9282.1-2008, GB/T 11275-2007 and GB/T 13892-2012. Issued on 30 April 2015, it has applied since 1 October 2015.
Found what you need?
Document preview — HG/T 4803-2015
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4803-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for methallyl alcohol polyether. It describes the structure and the naming of the polyether and then its requirements, sampling, test methods, inspection rules, marking, packaging, transport and storage. The product covered is polymerized from methallyl alcohol and ethylene oxide as the main raw materials and serves as a feedstock for polycarboxylate superplasticizers, silicone emulsions and similar products. Classified G73 with ICS 71.100.40, it draws its methods from GB/T 6368-2008, GB/T 6678-2003, GB/T 6682-2008, GB/T 7383-2007, GB/T 8170-2008, GB/T 9282.1-2008, GB/T 11275-2007 and GB/T 13892-2012.
HG/T 4803-2015 falls under ICS 71.100.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6368-2008 — Surface active agents -- Determination of pH of aqueous solution -- Potentiometric method
GB/T 6678-2003 — General principles for sampling chemical products
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 7383-2007 — Non-ionic surface active agents - Determination of hydroxyl value
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9282.1-2008 — Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 1: Visual method
GB/T 11275-2007 — Surface active agents -- Determination of water content
GB/T 13892-2012 — Surface active agents - Determination of iodine value
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 4803-2026 (later edition)
Standards on related subjects:
GB/T 1677-2023 — Determinating the epoxy value of plasticizers
GB/T 1668-2008 — Plasticizers - Determination of acid value and acidity
GB/T 1676-2008 — Determinating the iodine value of plasticizers
HG/T 4490-2026 — Methyl butenol polyether
HG/T 2672-2026 — Levelling agent O
6 Classification and status
International classification (ICS): 71.100.40
Chinese Standard Classification (CCS): G 73
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6368-2008Surface active agents -- Determination of pH of aqueous solution -- Potentiometric method
- GB/T 6678-2003General principles for sampling chemical products
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 7383-2007Non-ionic surface active agents - Determination of hydroxyl value
- GB/T 8170-2008Rules of rounding off for numerical values & expression and judgement of limiting values
- GB/T 9282.1-2008Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 1: Visual method
Similar standards
How to Download HG/T 4803-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11275-2007 — Surface active agents -- Determination of water content
GB/T 13892-2012 — Surface active agents - Determination of iodine value
GB/T 6368-2008 — Surface active agents -- Determination of pH of aqueous solution -- Potentiometric method
HG/T 4803-2015
$95.00