HG/T 4757-2014Coatings for agricultural machinery (English PDF)
农用机械涂料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4757-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 24, 2014
Implementation date
June 1, 2015
Scope
HG/T 4757-2014 is the English-translated version of 农用机械涂料.
Paints for farm machinery are dealt with in HG/T 4757-2014, a recommended chemical industry standard of China. It classifies coating products for agricultural machinery and then gives their requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage.
It applies to coatings used for the protection and decoration of agricultural machinery. A long list of GB test methods is quoted with it, among them GB 252, GB/T 1725-2007, GB/T 1732-1993, GB/T 1766-2008, GB/T 1768-2006, GB/T 1771-2007, GB/T 1865-2009, GB/T 6739-2006 and GB/T 6753.1-2007. Issued on 24 December 2014, it has applied since 1 June 2015.
Found what you need?
Document preview — HG/T 4757-2014
National Standard of the People's Republic of China
- ICS
- 87.040
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4757-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Paints for farm machinery are dealt with in HG/T 4757-2014, a recommended chemical industry standard of China. It classifies coating products for agricultural machinery and then gives their requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage. It applies to coatings used for the protection and decoration of agricultural machinery. A long list of GB test methods is quoted with it, among them GB 252, GB/T 1725-2007, GB/T 1732-1993, GB/T 1766-2008, GB/T 1768-2006, GB/T 1771-2007, GB/T 1865-2009, GB/T 6739-2006 and GB/T 6753.1-2007.
HG/T 4757-2014 falls under ICS 87.040, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 252
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
GB/T 1726-1979 — Methods of test for hiding power of paints
GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties
GB/T 1732-1993 — Determination of impact resistance of film
GB/T 1740-2007 — Determination of resistance to heat and humidity of paint films
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 1768- 2006 — Paints and varnishes -- Determination of resistance to abrasion -- Rotating abrasive rubber wheel method
GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)
GB/T 1865-2009 — Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation
GB/T 3186
GB/T 5209-1985 — Paints and varnishes. Determination of resistance to water. Water immersion method
GB/T 6682
GB/T 6739-2006 — Paints and varnishes - Determination of film hardness by pencil test
GB/T 6742-2007 — Paints and varnishes -- Bend test (cylindrical mandrel)
GB/T 6753.1-2007 — Paints, varnishes and printing inks - Determination of fineness of grind
GB/T 8170
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
HG/T 4758-2026 — Water-based acrylic resin coatings
HG/T 4755-2026 — Polysiloxane coatings
HG/T 4755-2014 — Polysiloxane coatings
6 Classification and status
International classification (ICS): 87.040
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 252General diesel fuels
- GB/T 1725-2007Paints, varnishes and plastics -- Determination of non-volatile-matter content
- GB/T 1726-1979Methods of test for hiding power of paints
- GB/T 1728-1979Determination of drying time of coating and putty films
- GB/T 1732-1993Determination of impact resistance of coating films
- GB/T 1740-2007Determination of resistance to heat and humidity of paint films
Similar standards
How to Download HG/T 4757-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 4757-2014
$120.00