HG/T 4597-2014Continuous vacuum dryers (English PDF)
真空连续干燥机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4597-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4597-2014 is the English-translated version of 真空连续干燥机.
Continuous vacuum dryers are covered by HG/T 4597-2014, a recommended Chinese chemical industry standard. It provides terms and definitions, structural types, product classification, the basic parameters and the model designation scheme, and then the requirements, test methods, inspection rules, marking, packaging, transport and storage.
Being equipment rather than a chemical, it is classified G92 and indexed under 71.120 and 75.180.20. Its quoted documents include GB 150, GB/T 985.1-2008, GB/T 1184-1996, GB/T 1804-2000, GB/T 3163-2007, GB 4208-2008, GB 5226.1-2008, GB/T 9969-2008, GB/T 13306-2011, GB/T 15706.2-2007 and GB/T 19142-2008. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4597-2014
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4597-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Continuous vacuum dryers are covered by HG/T 4597-2014, a recommended Chinese chemical industry standard. It provides terms and definitions, structural types, product classification, the basic parameters and the model designation scheme, and then the requirements, test methods, inspection rules, marking, packaging, transport and storage. Being equipment rather than a chemical, it is classified G92 and indexed under 71.120 and 75.180.20. Its quoted documents include GB 150, GB/T 985.1-2008, GB/T 1184-1996, GB/T 1804-2000, GB/T 3163-2007, GB 4208-2008, GB 5226.1-2008, GB/T 9969-2008, GB/T 13306-2011, GB/T 15706.2-2007 and GB/T 19142-2008.
HG/T 4597-2014 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 985.1-2008 — Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3163-2007 — Vacuum technology - Terminology
GB/T 3768
GB/T 3797
GB 3836.1
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB/T 4879
GB/T 5048
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 12265.3
GB/T 13306-2011 — Plates
GB/T 15706.2-2007 — Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
GB/T 19142-2008 — Packaging for export commodity general rule
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 4595-2014 — Fine grinding equipment for thermosetting powder coatings
HG/T 4594-2014 — Cooling and flaking equipment for thermosetting powder coatings
HG/T 4591-2014 — Chemical hydraulic turbines
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 985.1-2008Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3163-2007Vacuum technology - Vocabulary
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
Similar standards
How to Download HG/T 4597-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 4597-2014
$225.00