HG/T 4560-2013Coatings - Test method for anti-condensation performance (English PDF)
涂料的防结露性能测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4560-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4560-2013 is the English-translated version of 涂料的防结露性能测试方法.
HG/T 4560-2013 is the recommended Chinese chemical industry standard that lays down the test method for the anti-condensation performance of coatings. It contains the terms and definitions, the principle of the method, the preparation of the samples, the test conditions, the test equipment and the treatment of the test results.
The method serves to judge how a coating behaves towards the condensation that forms on its surface, and it is used for coatings presented as anti-condensation.
Two documents only are called up for its application, GB/T 3186 and GB/T 3280. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4560-2013
National Standard of the People's Republic of China
- ICS
- 87.040
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4560-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard that lays down the test method for the anti-condensation performance of coatings. It contains the terms and definitions, the principle of the method, the preparation of the samples, the test conditions, the test equipment and the treatment of the test results. The method serves to judge how a coating behaves towards the condensation that forms on its surface, and it is used for coatings presented as anti-condensation. Two documents only are called up for its application, GB/T 3186 and GB/T 3280.
HG/T 4560-2013 falls under ICS 87.040, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 3186
GB/T 3280
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 6739-2022 — Paints and varnishes - Determination of film hardness by pencil test
GB/T 3181-2008 — Colour standard for paint film
GB/T 5208-2008 — Determination of flash point -- Rapid equilibrium closed cup method
HG/T 3330-2026 — Determination of dielectric strength of insullac films
HG/T 3334-2012 — Electrophoretic coatings - General test methods
HG/T 3330-2012 — Determination of breakdown strength of insulating varnish films
6 Classification and status
International classification (ICS): 87.040
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4560-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 3280-1992 — Cold rolled stainless steel sheets and plantes
GB/T 3280-2007 — Cold rolled stainless steel plate, sheet and strip
HG/T 4560-2013
$85.00