HG/T 4494-2013V-ribbed belts for industrial use (English PDF)
工业用多楔带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4494-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4494-2013 is the English-translated version of 工业用多楔带.
HG/T 4494-2013 is the Chinese chemical industry standard for V-ribbed belts for industrial use. It defines the construction of the belt, the type designations and markings and the cross-sectional dimensions, and then gives the requirements, the test methods and the inspection rules, followed by marking, labeling, packaging, transport and storage.
The belts it covers are the industrial V-ribbed type, shortened in the text to V-ribbed belt. It is a recommended standard, classified G42 in China and ICS 21.220.10.
Dimensional and test references are taken from GB/T 16588-2009 and GB/T 17516.2-1998. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4494-2013
National Standard of the People's Republic of China
- ICS
- 21.220.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4494-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for V-ribbed belts for industrial use. It defines the construction of the belt, the type designations and markings and the cross-sectional dimensions, and then gives the requirements, the test methods and the inspection rules, followed by marking, labeling, packaging, transport and storage. The belts it covers are the industrial V-ribbed type, shortened in the text to V-ribbed belt. It is a recommended standard, classified G42 in China and ICS 21.220.10. Dimensional and test references are taken from GB/T 16588-2009 and GB/T 17516.2-1998.
HG/T 4494-2013 falls under ICS 21.220.10, in the field of mechanical systems and components.
This catalogue holds 7 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 16588-2009 — Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions
GB/T 17516.2-1998 — V-and ribbed belts drive. Dynamic test to determine pitch zone location. Part 2: V-ribbed belts
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 5563-2025 — Rubber and plastics hoses and hose assemblies - Hydrostatic testing
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses
HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
HG/T 4493-2013 — Light-duty V-belts for agricultural machinery
6 Classification and status
International classification (ICS): 21.220.10
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download HG/T 4494-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16588-2009 — Belt drives -- Pulleys and V-ribbed belts for industrial applications -- PH, PJ, PK, PL and PM profiles: dimensions
GB/T 17516.2-1998 — V-and ribbed belts drive. Dynamic test to determine pitch zone location. Part 2: V-ribbed belts
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 4494-2013
$135.00