HG/T 4490-2013Methyl butenol polyether (English PDF)
甲基丁烯醇聚醚
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4490-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4490-2013 is the English-translated version of 甲基丁烯醇聚醚.
HG/T 4490-2013 is the recommended Chinese chemical industry standard for methyl butenol polyether. It gives the structure of the compound and the rules for naming it, then sets the technical requirements, the sampling and test methods, the inspection rules, and the marking, packaging, transport and storage provisions.
The product covered is the methyl butenol polyether used as a raw material in the synthesis of polycarboxylate superplasticizers. Testing follows GB/T 601-2002, GB/T 602-2002, GB/T 603-2002, GB/T 6368-2008, GB/T 6682-2008, GB/T 7383-2007, GB/T 8170-2008, GB/T 11275-2007 and GB/T 13892-2012, all quoted by the standard. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4490-2013
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4490-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for methyl butenol polyether. It gives the structure of the compound and the rules for naming it, then sets the technical requirements, the sampling and test methods, the inspection rules, and the marking, packaging, transport and storage provisions. The product covered is the methyl butenol polyether used as a raw material in the synthesis of polycarboxylate superplasticizers. Testing follows GB/T 601-2002, GB/T 602-2002, GB/T 603-2002, GB/T 6368-2008, GB/T 6682-2008, GB/T 7383-2007, GB/T 8170-2008, GB/T 11275-2007 and GB/T 13892-2012, all quoted by the standard.
HG/T 4490-2013 falls under ICS 71.100.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions
GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity
GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 6368-2008 — Surface active agents -- Determination of pH of aqueous solution -- Potentiometric method
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 7383-2007 — Non-ionic surface active agents - Determination of hydroxyl value
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 11275-2007 — Surface active agents -- Determination of water content
GB/T 13892-2012 — Surface active agents - Determination of iodine value
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 4490-2026 (later edition)
Standards on related subjects:
GB/T 1677-2023 — Determinating the epoxy value of plasticizers
GB/T 1668-2008 — Plasticizers - Determination of acid value and acidity
GB/T 1676-2008 — Determinating the iodine value of plasticizers
HG/T 4803-2026 — Methallyl alcohol polyether
HG/T 2672-2026 — Levelling agent O
6 Classification and status
International classification (ICS): 71.100.40
Chinese Standard Classification (CCS): G 73
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601-2002Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 602-2002Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 603-2002Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6368-2008Surface active agents -- Determination of pH of aqueous solution -- Potentiometric method
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- GB/T 7383-2007Non-ionic surface active agents - Determination of hydroxyl value
How to Download HG/T 4490-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11275-2007 — Surface active agents -- Determination of water content
GB/T 13892-2012 — Surface active agents - Determination of iodine value
GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions
HG/T 4490-2013
$135.00