HG/T 4443-2012Textile dyeing and finishing auxiliaries - Determination of viscosity (English PDF)
纺织染整助剂 粘度的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4443-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 4443-2012 is the English-translated version of 纺织染整助剂 粘度的测定.
HG/T 4443-2012 is the recommended Chinese chemical industry standard for the determination of viscosity in textile dyeing and finishing auxiliaries. It specifies a method in which a rotational viscometer is used to measure the viscosity of the auxiliary.
The method is written for auxiliaries that behave as Newtonian fluids or close to them. Only GB/T 6682 and GB/T 8170 are cited as normative references. The standard carries the Chinese classification G70 and the international classification 71.100.40, shared with the rest of the dyeing and finishing auxiliary series. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 4443-2012
National Standard of the People's Republic of China
- ICS
- 71.100.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4443-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for the determination of viscosity in textile dyeing and finishing auxiliaries. It specifies a method in which a rotational viscometer is used to measure the viscosity of the auxiliary. The method is written for auxiliaries that behave as Newtonian fluids or close to them. Only GB/T 6682 and GB/T 8170 are cited as normative references. The standard carries the Chinese classification G70 and the international classification 71.100.40, shared with the rest of the dyeing and finishing auxiliary series.
HG/T 4443-2012 falls under ICS 71.100.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
4 Where this standard sits
It cites 2 standards, among them GB/T 6682-2008, GB/T 8170-2008, listed in full above.
One other standard in this catalogue cites it: HG/T 4742-2014.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 1677-2023 — Determinating the epoxy value of plasticizers
GB/T 1668-2008 — Plasticizers - Determination of acid value and acidity
GB/T 1676-2008 — Determinating the iodine value of plasticizers
HG/T 4452-2022 — Textile dyeing and finishing auxiliaries - Determination of flammability of liquid products
HG/T 4451-2022 — Textile dyeing and finishing auxiliaries - Determination of oxidizing properties of liquid products
HG/T 4434-2012 — Spin finishes for polyester draw textured yarn (DTY)
7 Classification and status
International classification (ICS): 71.100.40
Chinese Standard Classification (CCS): G 70
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download HG/T 4443-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 4443-2012
$25.00