HG/T 4175-2011General technical requirements for instrument power supply systems in chemical plants (English PDF)
化工装置仪表供电系统通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4175-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4175-2011 is the English-translated version of 化工装置仪表供电系统通用技术要求.
HG/T 4175-2011 sets general technical requirements for the instrument power supply systems of chemical plants. It covers the configuration required of such a system, the requirements the system must meet, and the testing, inspection and maintenance provisions that go with it.
What it applies to is the instrumentation power supply of chemical process plants. It quotes HG/T 20509-2000. It carries Chinese classification G97, and was issued by the Ministry of Industry and Information Technology as a recommended standard. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4175-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4175-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
HG/T 4175-2011 sets general technical requirements for the instrument power supply systems of chemical plants. It covers the configuration required of such a system, the requirements the system must meet, and the testing, inspection and maintenance provisions that go with it. What it applies to is the instrumentation power supply of chemical process plants. It quotes HG/T 20509-2000. It carries Chinese classification G97, and was issued by the Ministry of Industry and Information Technology as a recommended standard.
HG/T 4175-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
HG/T 20509-2000 — Design code for instrument power supply system
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 4178-2011 — Intelligent dual-cup flash point testers
HG/T 4177-2011 — Automatic complete units for lime milk preparation
HG/T 4176-2011 — Pneumatic triple-offset butterfly valves - General technical specifications
6 Classification and status
Chinese Standard Classification (CCS): G 97
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download HG/T 4175-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 4175-2011
$70.00