HG/T 4110-2009Cooling fans (pultruded blades) - Technical specifications (English PDF)
冷却风机(挤拉叶片)技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4110-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 4110-2009 is the English-translated version of 冷却风机(挤拉叶片)技术条件.
HG/T 4110-2009 is the Chinese chemical industry standard for cooling fans whose blades are made by pultrusion. It fixes the naming and the basic parameters of these fans and sets technical requirements for blade design, for the pultrusion itself, and for assembly, balancing, natural frequency and installation.
It applies to fans of 1800 mm to 10060 mm diameter used in the mechanical draught cooling towers of circulating water systems and in air-cooled heat exchangers.
The blades it deals with are of the newer pultruded kind, made of glass reinforced plastic, steel or aluminium. Its references include GB/T 1236, GB/T 6892, GB/T 7190.1, GB/T 7190.2, GB/T 9239.1 and HG/T 3132. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 4110-2009
National Standard of the People's Republic of China
- ICS
- 71.120.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4110-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for cooling fans whose blades are made by pultrusion. It fixes the naming and the basic parameters of these fans and sets technical requirements for blade design, for the pultrusion itself, and for assembly, balancing, natural frequency and installation. It applies to fans of 1800 mm to 10060 mm diameter used in the mechanical draught cooling towers of circulating water systems and in air-cooled heat exchangers. The blades it deals with are of the newer pultruded kind, made of glass reinforced plastic, steel or aluminium. Its references include GB/T 1236, GB/T 6892, GB/T 7190.1, GB/T 7190.2, GB/T 9239.1 and HG/T 3132.
HG/T 4110-2009 falls under ICS 71.120.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1236
GB/T 6892
GB/T 7190.1
GB/T 7190.2
GB/T 9239.1
HG/T 3132
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 5999-2024 — Volatile organic compound cyclone adsorption-condensation recovery device
HG/T 5998-2024 — Volatile organic compound cyclone adsorption-catalytic combustion device
HG/T 6187-2023 — Polypropylene dryers
6 Classification and status
International classification (ICS): 71.120.99
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1236Industrial fan -- Performance testing using standardized airways
- GB/T 6892Wrought aluminium and aluminium alloy extruded profiles for general engineering
- GB/T 7190.1Mechanical draft cooling towers - Part 1: Medium and small open cooling towers
- GB/T 7190.2Mechanical draft cooling towers - Part 2: Large open cooling towers
- GB/T 9239.1Mechanical vibration—Rotor balancing—Part 1:Introduction
- HG/T 3132Type L cooling tower fans
Similar standards
How to Download HG/T 4110-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1236-1985 — Test methods of aerodynamic performance for fans
GB/T 1236-2000 — Industrial fans. Performance testing using standardized airways
GB/T 1236-2017 — Industrial fan -- Performance testing using standardized airways
HG/T 4110-2009
$105.00